SAFETY WARNING WARNING: To reduce the risk of fire or electric shock , DO NOT expose this product to rain or moisture ! The lightning Flash with arrowhead symbol within a triangle, Alerts the user to “dangerous Voltage” which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual IMPORTANT FOR LASER PRODUCTS...
PRODUCT FEATURES Main features of the product: Fully compatible with DVD/SVCD/VCD/CD/MP3/ PICTURE-CD/CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/ DVD+RW/HDCD /JPEG Video horizontal resolution : 500 lines Compatible with MPEG4/DivX3.11 /DivX4/DivX5 and Xvid. Built-in Dolby AC-3 decoder Advanced MDDi Progressive scan output Full function remote control USB/Memory card(MS/MMC/SD) slot HDMI/Resolution up to 1080i(50Hz) PAL/Auto/NTSC optional Power Supply: AC 110-240V, 50/60HZ...
DISCS INFORMATION DISC FORMATS SUPPORTED BY THIS PLAYER PLAYBACK TIME/ DISC TYPE DISC LOGO CONTENTS SIZE PLAYBACK SIDES About 133min(SS-SL) Audio + Video About 242min(SS-DL) 12cm (Active Picture) About 266min(DS-SL) About 484min(DS-DL) Audio + Video About 45 min SVCD SVCD 12cm (Active Picture) 12cm...
Parts Introduction Front panel drawing Function Key introduction: 7 STOP: Press to stop the playback. Disc Tray: For disc to be loaded. Display screen 8 USB: Connect with external USB device; Power: Press to turn on/off power. 3 in 1 card reader: MS/MMC/SD cards compatible. Remote Control signal receiving window.
Page 8
Parts Introduction How to use the Remote Control Point the remote control toward to the remote sensor on the DVD Player’s front panel. It working limits is within an angle of 30°and a distance of 7m. Note: When using the remote control, no obstacle is to be set between the remote control and remote sensor. Normally the batteries can last for around six months.
System Connections Precaution: Do not turn on the power of the player before all connections have been correctly done. Important remark: The diagram maybe different from your DVD PLAYER, the connections are only for your reference. Connecting to TV The Video output connector of the player include: Video output, S-video output, Y/PbCb/PrCr output, component output and VGA output.
Page 10
System Connections HDMI connection setting (only for Player with this connector) Connect the HDMI output jack on the DVD Player to the Display device’s HDMI input jack with a HDMI cable. Press the HDMI button on the remote control to shift to HDMI signal output mode, switch display device to corresponding HDMI mode.
System Connection Connecting To An Amplifier With 5.1 CH Audio Output Connect the player’s 5.1CH output to the 5.1CH amplifier’s 5.1CH input connector with Audio cable, as shown in below figure. Set the player’s Audio output mode as the “DOWNMIX” to “5.1ch” in “SPEAKER SETUP” menu. The default audio output set is Stereo, then you can enjoy the 5.1CH home theatre system sound effect.
FUNCTION OPERATIONS Load Discs Connecting the player to other apparatus, turn on the player, then follow below steps. 3. Load the disc 1. Turn on the player Press the POWER button. then the player will Put the disc in the tray as shown in the right search for the disc automatically.
Page 13
FUNCTION OPERATIONS VOLUME During playback, press the VOL button to turn up, press the VOL button to turn down. FAST FORWARD & REVERSE Press the buttons to activate fast forward or reverse function, continually press to select different speed fast forward or reverse function. SLOW FORWARD &...
Page 14
FUNCTION OPERATIONS DVD PLAYBACK MENU When playing DVD disc, generally a menu will appear for further operation, you can use the direction buttons to highlight the item you would like and press the PLAY button to confirm. TITLE & CHAPTER Generally there are several titles in a DVD disc, and several chapters under a title.
FUNCTION OPERATION MP3 PLAYBACK MP3 is the third audio compression format of international standard MPEG. The audio signal is compressed at the rate of 12:1. using MP3 format, one disc can record more than 600 minutes music, the timbre of which is similar with that of CD discs. There are many different formats for storing MP3 songs.
System Setup Setup menu Attention: Some menus maybe different from your DVD PLAYER, the setup menu instruction is only for your reference. At Stop status, when press the SETUP button, the TV screen will display a main menu. It includes: z General Setup Page.
Page 17
System Setup General Setup Contents - TV DISPLAY: set up your TV system as: “NORMAL/PS”, “NORMAL/LB”, “WIDE “and “Wide Squeeze”. - OSD LANG: Select English or simplified Chinese as your OSD language. - CAPTIONS: Some DVD discs have hidden captions. You can turn on or off the hidden captions by using this item.
Page 18
System Setup Set Downmix: select different Audio output mode: “LT/RT”: means with left and right CH audio effect. “Stereo”: indicates the normal stereo sound. ”V SURR”: shows the audio output is of surround signal. “5.1ch” : means 5.1CH output. Change 5.1 to OFF ( Note: If connected to an amplifier with 2 CH signal input, “LT/RT”...
Page 19
System Setup - Select digital audio out “Off”: the amplifier digital signal input off; “RAW”: no decoding on the amplifier digital signal input; “PCM”: the amplifier must be supported by PCM decoding or Dolby digital decoding function; - Select LPCM Output: When SPDIF Output under “ PCM” mode, you can select the LPCM out as” 48K” “...
Page 20
System Setup 5. Equalizer Setup Page Press “W” to back to the audio setting page menu and move to choose “Equalizer Page”, press PLAY to enter the page and press to go to the EQ Type, Bass Boost, Super Bass and Treble Boost selection of the equalizer.
Page 21
System Setup -Set Filter: select different sampling frequency. “Off” means as CD sampling mode. Video Setup Page Press “Setup” key on the remote control, and press “ ” to select” Video Setup Page” , press PLAY or button to go into video setting page menu, and press , button to choose video output mode, picture setting and so on.
Page 22
System Setup Notes: HDMI setup will only be activated with no disc present or at EJECT status. To enjoy best sound effect, you need to set HDMI output mode to be SPDIF/PCM on the SPDIF Setup page. But please make sure your device supports HDMI function. - Video Quality Press“W”...
Page 23
System Setup - Set TV TYPE: Select the “TV Type” as: “PAL Auto, NTSC” mode refer to your TV system or disc contents. - Set PBC: To set PBC with “On off”, PBC “On”, means the function is available; ”Off”, no function. - Set Audio: Select different Audio language among: “English, French, Spanish, Japanese, Korean, Russian, Thai, and others”.
TROUBLE SHOOTING Symptom What to check -If disc is loaded in. -If disc is loaded upside down. -If disc is dirty or warped. -If the player’s region code is the same as region code of DVD disc. The player does not play. -If water condensation has occurred.
SPECIFICATIONS Laser Wavelength Wavelength: 780/650nm Video System PAL/Auto/NTSC Frequency Response 20Hz 20kHz ±2.5 dB Audio Signal-to-noise Rate 85dB Audio distortion + noise -70dB 1kHz Channel Separation 70dB 1kHz Dynamic Range 80dB 1kHz Analog Audio Out Out Level: 2V± Load: 10k Audio Out Coaxial: Out Level 0.5V ,Load: 75...
Need help?
Do you have a question about the DVH-220 and is the answer not in the manual?
Questions and answers