Polaroid PLCHUPAN Instructions

INSTRUCTIONS
UNIVERSAL CHARGER FOR LI-ION BATTERIES
PANASONIC
PLCHUPAN
PANASONIC BATTERY LIST
D120 S002 BCF10
D220 S003 BCG10
D320 S004 BLB13
S602 S005 VBK180
VB070 S006 BCH7
VBD140 S007
VBD210 S301
S001 S10
Questions?
Need some help?
PRECAUTIONARY INFORMATION
Locate your battery type from the list provided. If your type is
not listed, DO NOT USE THIS CHARGER. Improper use can
cause the charging circuit to burn out, and batteries not listed
may over-heat and may combust. Do not use the charger in
wet locations.
CHARGING INSTRUCTIONS
1 Insert your choice of power adapter cords into the jack
provided on the rear of the charger, either the 2-prong
120-volt adapter or the 12-volt automotive cigarette
lighter plug.
2 The green LED power indicator will light.
3 Locate your battery's model number in figure A and insert
it into that slot. Be sure the battery contacts align with the
charging terminals in the slot.
4 The LED will turn red during charging and will return to
green when the charging cycle is complete (30-60 minutes
depending on battery size and voltage rating).
5 When the LED returns to green, remove the battery from its
charging slot and disconnect the adapter cord from its
power source.
Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings, LLC, used under license. All other
trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this
For technical support
product. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer's Warranty
please call 1-800-226-6534
or support. For warranty information, visit www.polaroid.com.
or visit www.polaroid.com
© 2011 All Rights Reserved
Distributed by: C&A Licensing, LLC 2 Bergen Turnpike, Ridgefield Park, NJ 07660