Page 1
Built-In Hob OI 636 185261296 20.08.2011 R.AA...
Page 2
Please read this user manual first! Dear Customer, Thank you for prefering a/an Arçelik product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
TABLE OF CONTENTS General information Preparation Overview ............4 Tips for saving energy ......... 11 Technical specifications ........4 Initial use ............ 11 First cleaning of the appliance ...... 11 Important safety instructions How to use the hob General safety ..........5 Intended use ..........
General information Overview Induction cooking plate Vitroceramic surface Assembly clamp Base cover Technical specifications Voltage / frequency 220-240 V~/380-415 V 2N ~ 50 Hz Total power consumption max. 7200 W Fuse min. 16 A x 2 / 32 A Cable type / section H05VV-FG 5 x 1,5 mm Cable length max.
Important safety instructions This section contains safety instructions that will • Be careful when using alcoholic drinks in help you avoid risk of injury and damage. All your dishes. Alcohol evaporates at high warranties will become void if you do not follow temperatures and may cause fire since it these instructions.
Safety for children away from children. Please dispose of all parts of the packaging according to • Packaging materials are dangerous to environmental standards. children. Keep packaging materials in a safe SAVE THESE INSTRUCTIONS place out of reach of children. •...
Installation Refer to the nearest Authorised Service Agent for Before installation installation of the product. Make sure that the The hob is designed for installation in a electric and gas installations are in place before commercial worktop. A safety distance must be calling the Authorised Service Agent to have the left between the appliance and the kitchen walls product ready for operation.
Installation and connection DANGER: • The product must be installed in accordance Before starting any work on the with all local gas and electrical regulations. electrical installation, disconnect the product from the mains supply. Do not install the hob on places with sharp There is the risk of electric shock! edges or corners.
Page 9
housing that contact with the counter as illustrated in figure. 3. Center the product in the counter. 4. Using the installation clamps secure the hob by fitting through the holes on the lower casing. It is required to leave a ventilation opening of minimum 180 cm at the rear section of the furniture as illustrated in the following figure.
Disposing of the old product Disposal Package information • Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Dispose of the old product in an environmentally Regulations. Do not dispose of the friendly manner. packaging materials together with the This equipment bears the selective sorting domestic or other wastes.
Preparation • Keep the cooking zones and bottom of the Tips for saving energy pots clean. Dirt will decrease the heat The following information will help you to use conduction between the cooking zone and your appliance in an ecological way, and to save bottom of the pot.
How to use the hob When you want to move the saucepan onto General information about cooking another cooking zone, lift and place it onto the cooking zone you want instead of sliding Never fill the pan with oil more than one third of it.
Do not put metal items such as forks, knives or Saucepan recognition-focusing system saucepan covers onto your hob since they can In induction cooking, only the area covered by get heated. the vessel on the relevant cooking zone is Never use aluminium folio for cooking. Never energised.
Control panel If no operation is performed within 10 Specifications seconds, the hob will automatically return to Standby mode. On / Off key Temperature setting/Increasing Turning off the hob timer 1. Touch the " " key on the control panel. Temperature setting/Decreasing The hob will turn off and return to Standby mode.
Page 15
Setting the temperature level Turning off High Power (Booster) : Touch " " or " " keys to set the temperature • To disable the Booster function, touch " " and set the temperature to level "9" . level between "1" and "9" or "9" and "1". Turning off the cooking zones: Cooking zone goes out of booster and continues to operate at level "9"...
Page 16
2. Touch " " and " " keys simultaneously After “bip” signal touch " " to activate the childlock. » Childlock will be activated and "L" symbol appears on all cooking zone display. Right rear and left rear cooking zone displays serve as timer display when the timer is active.
Page 17
Using induction cooking zones safely and Temperature level Operation time limit - hour efficiently (*) The hob will drop to level 9 after 5 minutes Operating principles: Induction hob heats Overheating protection directly the cooking vessel as a feature of its Your hob is equipped with some sensors operating principles.
Maintenance and care General information The surface might get damaged by some detergents or cleaning materials. Service life of the product will extend and the Do not use aggressive detergents, cleaning possibility of problems will decrease if the powders/creams or any sharp objects product is cleaned at regular intervals.
Troubleshooting Product emits metal noises while heating and cooling. • When the metal parts are heated, they may expand and cause noise. >>> This is not a fault. Product does not operate. • The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. If necessary, replace or reset them.
Page 20
Filename: 185261296.doc Directory: \\Arbol17\mac\A_TCTOOLBOX_Ürünler\YERLI_OCAK_TCT_2008\ARCELIK\18526129 6_OI636 Template: D:\Documents and Settings\ar720007\Application Data\Microsoft\Templates\Normal.dotm Title: Subject: Author: Arcelik BT Keywords: Comments: Creation Date: 02.10.2012 08:54:00 Change Number: Last Saved On: 02.10.2012 08:59:00 Last Saved By: Arcelik BT Total Editing Time: 5 Minutes Last Printed On: 02.10.2012 08:59:00...
Need help?
Do you have a question about the OI 636 and is the answer not in the manual?
Questions and answers