Connecting the devices
1. Power LED.
2. Reset button.
Press to reset camera to
factory default settings.
3. Ethernet RJ45 port.
Connect to network devices.
4. DIP switches.
Configure camera settings.
Setting the DIP switches
You can set up six camera functions using the DIP switch bank on the
rear of the camera. Figure 2 on page 6 shows the DIP switch layout.
For detailed descriptions on the functions of the DIP switch settings,
please refer to the user manual.
UltraView IP XP3 box day/night range camera
5. Alarm input and output.
Connect to be able to trigger
an alarm at the network
device.
6. Power supply.
Connect 12 VDC or 24 VDC
power supply.
7. Video output.
Connect to a CCTV monitor
5 EN