Pin Code Request; Fixed Dial Number - LG KF390 User Manual

Settings

PIN Code Request

You can activate a PIN (Personal
Identification Number). You can check the
current status of configuration from the
status bar.
PIN request and release procedures
Item
Enable PIN
Request
Disable PIN
Request
1. Select 'PIN Code Request' item from the
list, and press [Select]. Then a window
allowing you to select 'On' or 'Off'
appears.
- Select 'On'/'Off' from the list, press
[Select], and input the current PIN code
to set the PIN request. If 'PIN Code
Request' is already enabled/disabled,
an "Already activated"/ "Already
cancelled" message will be displayed.
64
(Menu 9.6.3)
Description
You have to input the PIN
code each time the mobile
phone is turned on.
You do not have to
input the PIN code when
the mobile phone is
turned on.
2. 3 incorrect PIN code entries in the PIN
code input window would invalidate
the PIN code. In this case, you have to
input the PUK (PIN Unblock Key) code to
configure the PIN code again.
3. The maximum allowed number of
attempts of PUK input is 10 times.
ATTENTION: after having entered 10
times an incorrect PUK code, the USIM
card will be blocked and must be
replaced.
Press the C key in the PIN code input
window to return to the previous step.

Fixed Dial Number

(SIM dependent)
You can restrict your outgoing calls to
selected phone numbers. The numbers are
protected by your PIN2 code.
On: You can restrict your outgoing calls
v
to selected phone numbers.
Off: You can cancel fixed dialling
v
function.
List view: You can view the number list
v
saved as Fixed dial number.
(Menu 9.6.4)