Summary of Contents for MISENSE MS-E8221
- Page 1 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. User's Manual For MS-E8221 Version:V1.0 WWW.MISENSECOM.COM...
-
Page 2: Table Of Contents
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. CONTENT ......................1 RODUCT INTRODUCTION Product summarise ......................1 Functional features......................1 1.2.1. EPON port Functional features..................1 1.2.2. Functional features of other ports ...................4 Size and weight ........................6 ......................6 QUIPMENT INSTALLATIONS Installation enviroment ......................6 EPON Port connection ......................6 Uplink SFP installation .......................7... -
Page 3: Product Introduction
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. 1. Product introduction 1.1 Product summarise MS-E8221 is the Central Office mainfram box platform of GEPON series products which is researched and developed by our company; it is Able to provide a variety of integrated services access, such as broadband, voice, IPTV, CATV. - Page 4 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. it receives EPON optical signal sent by ONU and transfer it to ethernet message then send to swich core equipment. It includes 2 PON port of 1.25G; usually each PON port can access 32 pieces of ONU equipment in the transmission distance of 20kms.
- Page 5 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. accesss to network Support DBA dynamic bandwidth allocation Support IGMP Proxy Support ACL functions Support QOS functions Support 4K MAC address with single channal OLT Support VLAN divided by LLID Offer abundant statistical information...
-
Page 6: Functional Features Of Other Ports
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. The net Work control supports in-band and out-band Support read of SFP mode 1.2.2. Functional features of other ports The sketch map of front panel is as follows: Chart 1 Product appearance diagram Descriptions of the interface... - Page 7 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. fiber or electical mode PON1&PON2 port, downlink, SFP mode Discriptions of indicator lights from the left to right and up to down Indicator light color Definition Off: power is abnomal Green On: power is nomal...
-
Page 8: Size And Weight
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. On: The first port connected to ONU PON1 LINK1 Green Off: The first port not connected to ONU On: The second port connected to ONU PON1 LINK2 Green Off: The second port not connected to... -
Page 9: Uplink Sfp Installation
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. 2.3 Uplink SFP installation The uplink port of the board is SFP interface, the default option of the board before leaving the factory is no SFP module, users could use proper SFP module according to his own situations. -
Page 10: Equipment Electrify
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. 2.4 Equipment electrify SFP up link port: on the basis of different type of modules, use net cable or optical fiber to connect up link port and up-layer network equipment (such as switch, router). -
Page 11: Technology Specifications
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. indicator lights should be like the follows: The power indicator light of the board is on At this time whether the EPON optical port is connected or not, the link light should be off temporarily The board’s initialization is completed no more than 20... -
Page 12: Up Link Data Port
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. Dispatch optical power Refer to SFP optical module specification Receive sensibility Refer to SFP optical module specification Saturation optical power Refer to SFP optical module specification Table 3 EPON Optical Port Parameters 3.2 Up link data port... -
Page 13: Out-Band Network Management Interface
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. 3.4 Out-band network management interface Standard: IEEE802.3 Transmission speed: 10M/100M full or half duplex Cable: RJ45 joint, CAT5 non-shield crossing-line, use crossing-line to connect PC, use parallel line to connect HUB. Tansmission distance: 100M Number of port: 1 3.5 Management configuration:... - Page 14 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. Common fault Fault resolution recommendation CONSOLE Check whether the connection cable is Connection is proper or not, if the parameter of band not succesful rate is set correctly, please use the special connection cable which is...
- Page 15 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. ensure the SFP module could work normally. Abserve the problem still exist after replace the SFP module , if Still could not solve the problem please seek our technology supporter Table 4 Common fault and resolution recommendation WWW.MISENSECOM.COM...
-
Page 16: Appendixa Security Prompt
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. Appendix A Security Prompt Please read this manual carefully, and install and use the equipment according to the discription of this manual Please don’t install this product in an enviroment which is too moist (coagulate) Please don’t touch optical dispacher module with your... -
Page 17: Appendixc Product Application
SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. Trouble Trouble handling PWR light is off Check the whether the power connector is plugged in Check the swicth button is ON EPON optical port Check is the time of the power connection LINK light is off... - Page 18 SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD. Chart 2 Product netting application chart WWW.MISENSECOM.COM Page 16/16...
Need help?
Do you have a question about the MS-E8221 and is the answer not in the manual?
Questions and answers