Table of Contents
Advertisement
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5.
Click the Erase button.
The factory default settings are restored. The user name is admin, the password is password, and
the LAN IP address is 192.168.1.1. DHCP is enabled.
Remote Management
You can access your router over the Internet to view or change its settings. You must know the router's
WAN IP address to use this feature. For information about remote access using Dynamic DNS, see
Storage Devices Through the Internet
Note
Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30
characters. See
To set up remote management:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net .
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Remote Management.
on page 80.
Change the admin Password
Manage Your Network
121
on page 106.
Access
Advertisement
Table of Contents
