Advertisement

Owner's Manual
The most comfortable upright
bicycles ever made.

Advertisement

Table of Contents
loading

Summary of Contents for Day6 Dream8

  • Page 1 Owner’s Manual The most comfortable upright bicycles ever made.
  • Page 2 At Day 6, we hope you will enjoy riding our bicycles as much as we enjoy designing them. We have truly combined the best features of a recumbent (feet on the ground; wide, comfortable seat and backrest; upright head position; reduced stress on the wrists, shoulders, low back, and crotch;...
  • Page 3: Bicycle Assembly

    Failure to do this voids all warranties and could result in damage to the bike or serious injury. Important: Dream8, Dream24, and Journey have a weight limit of 250 pounds. Patriot and Cyclone have weight limits of 300 pounds.
  • Page 4: Bicycle Set Up

    Bicycle Set Up Seat. Seat Height. When the seat height is properly adjusted, the balls of your feet should easily touch the ground, but more importantly, your leg should have a slight bend when the pedal is in the extended position. If your legs are completely straight when pedaling, you need to lower the seat.
  • Page 5 Seat Angle and Depth Newer Day 6’s have two bolts at the top of the seat post. Loosen them. (If the Horizontal Backrest Tube is attached to the seat post, you will first need to move it out of the way by loosening the two bolts that attach it to the seat post.) Contour Seat attaches to mounting base with...
  • Page 6 NOTE: Older Day 6 bicycles have a quick release to secure the seat post. If you are concerned about someone stealing your seat or you can’t get the quick release tight enough to secure the seat post, you may want to purchase a seat collar that uses a bolt instead of a quick release.
  • Page 7 Handlebar height adjustment. Newer Day 6’s have an adjustable stem which allows you to raise and lower the handlebar so you get a perfect fit. To change the height of the handlebars simply loosen the bolt on the side of the stem until you can raise and lower the stem.
  • Page 8: Bicycle Inspection

    NOTE: For optimal performance the handlebars should be almost parallel with the head tube. Having the handlebars too far forward or backward will affect the steering and can be dangerous. If they are too far back, they can hit your knees while pedaling.
  • Page 9: General Inspection

    The Big 4 These are the things people overlook most often when it comes to regular maintenance. Underinflated tires. Check tires weekly to prevent premature aging of tires, hard pedaling, accidents, and getting stranded. Over lubricated chains. Lubrication sounds good but too much attracts dust and dirt which wears out chains, derailleurs, and chain rings.
  • Page 10: Quick Release Levers

    Quick Release Levers: Quick release levers are used on both wheels and the backrest. Quick releases can be replaced with bolts if you are concerned about theft or having your settings changed. It is very important that all quick releases/bolts are tight. The quick release lever should never be tightened like a nut.
  • Page 11: Bicycle Cleaning

    Brakes and Pads: While rolling slowly, squeeze brake levers. Bike should stop quickly and levers should be at least ¾” from hand grips. Since brake cables stretch, it will be necessary to adjust cables periodically. See your local dealer for this. Make sure pads are aligned correctly on rims.
  • Page 12: Riding Rules

    Cleaning greasy chains and drive train components: Apply a degreaser and allow it to soak for 10 minutes. Scrub greasy area with an old brush. Lightly rinse with a hose. Lubrication Proper lubrication of moving parts means a longer life for the components of your bicycle.
  • Page 13: Riding Tips

    Watch for turning and stopping cars and opening car doors Be especially cautious at intersections and driveways Watch for hazards – pot holes, sand, curbs, RR tracks, manhole covers Watch for deep cracks running parallel with the road. Your front tire can get wedged in there and throw you Be careful when passing motor vehicles Obey all traffic rules and signs Use the proper hand signals when turning and stopping...
  • Page 14: Day 6 Bicycles Limited Warranty

    Do not disturb wildlife Slow down when approaching another rider or pedestrian Respect all public and private property Be extra alert when cycling with children – make sure they know the rules! Day 6 Bicycles Limited Warranty Day 6 Bicycles, (an Iowa corporation) located in Logan,IA makes the following Limited Warranty concerning Day 6 Bicycles: Limited Lifetime Warranty on Frames.
  • Page 15 Additional conditions: All warranties are in effect for the original owner only and are NOT transferable In order to exercise your rights under this warranty, the Day 6 bicycle must be presented to a dealer or Day 6 Bicycles along with a receipt or other proof of purchase which includes a serial number.

This manual is also suitable for:

Dream24JourneyPatriotCycloneSamson

Table of Contents