Table of Contents
Advertisement
steps to connect Wi-Fi networks.
Notices：
Unless you choose not to reserve the network with password, otherwise, there is no need to re-enter the corresponding password
when next time connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone needn't to
perform additional steps to connect Wi-Fi networks.
Connect to other Wi-Fi networks
1)
In the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will show on the Wi-Fi
network list.
2)
Touch other Wi-Fi networks, and then you can connect to this network.
Notices: in addition, mobile phone can also surf the Internet by GPRS. Our current SIM card GPRS to open after the default boot.
Users can manually choose to open data connection, when for the single card, direct drop down the status bar, touch "data
connection" is open, when for the card, location in "Settings > SIM card > cellular data > select SIM1 or SIM2", touched the
drop-down "data connection" of the status bar is open the current selected SIM card data connection, and then touch "data
connection" close this SIM card data connection..
4. Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Press home>menu, the touch settings.
2) Touch wireless and internet, then choose Bluetooth box to open the Bluetooth function. After started, the status box will
show this icon (
3) Touch Bluetooth settings, all the devices founded will display in the list under the icon.
(
bluetooth device is set open and visible to a nearby equipment work, other equipment as long as open the bluetooth can
search to the bluetooth and matching, open as long as the other devices can be detected at the same time, you can search
for other equipment and matching use)
After a paired devices, the system will show the paired and other equipment available
8
UMi Rome User's Manual
). Touch "scan for devices"the it starts to scan for all devices within range.
Advertisement
Table of Contents
