Mounting The Unit - Rockford Fosgate RFX8620M Installation & Operation Manual

MOUNTING THE UNIT

Removing the Transport Screws
Remove the three (3) transport screws located on the bottom of the unit and cover the holes using
the labels provided. These screws lock the unit's mechanism in place during shipping. Retain these
screws and replace them if the unit is ever returned for warranty or service.
Transport Screws
Mounting Angle Setting Levers
1. Adjust the Mounting Angle Setting Levers to the position the unit will be installed in.
0° for horizontal, angles of 10°, 22.5°, 45°, 67.5° and 90° for vertical.
2. Ensure the levers on both sides of the unit are adjusted the same.
3. Attach the decals provided to their corresponding side of the unit to keep the Mounting Angle
Setting Levers from shifting positions.
Angle Setting Lever
Decals
I
NSTALLATION
Decals
Horizontally
10°, 22.5°, 45° and 67.5°
(angle mounting)
Vertically
5