Play Music; Connect Ipod/Iphone With The Dock And Play Music - Onkyo RBX-500 Instruction Manual

Play music

Connect iPod/iPhone with the dock
and play music
Connect iPod/iPhone with the dock and
play music
Open the lid of the dock.
1
Press the back end of the lid to raise the front
end, and lift it.
2
Connect iPod/iPhone with the dock.
2
Insert an iPod/iPhone in the connector of the
dock firmly. When RBX-500 is in the standby
mode, the power will automatically turns on..
Notes:
When a case is attached to iPod/iPhone, the
iPod/iPhone may not able to be surely
connected with the dock. This will cause
problems such as no sound or no control. When
this happens, remove the case before
connection.
1
Press / button on the remote con-
3
troller.
button
U/I button
When input mode is iPod, you can control
iPod/iPhone to play music.
Tips:
When an iPod/iPhone is connected to the dock,
input mode is automatically changed to iPod.
This also happens when you start playing music
in iPod/iPhone; the input mode is automatically
changed to iPod.
Compatibility of iPod/iPhone
This unit can work with the following iPod/iPhone;
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod classic
• iPod nano (3rd, 4th, 5th and 6th generation)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G and
iPhone
Notes:
Be sure to use update iOS for iPod/iPhone. Please see
detailed information of iOS at Apple website;
Charging
When an iPod/iPhone is connected with the dock,
the iPod/iPhone is charged. During standby, the
power indicator lights up darkly in white (in orange at
Bluetooth standby).
In addition, when an iPod/iPhone is connected with
the dock, USB terminal on the backside is powered
off. If you want to use the power from USB terminal,
remove an iPod/iPhone from the dock.
En-11