Connections - Koss KS3112 Instruction Manual

CONNECTIONS

Video Connections
The way in which you connect your DVD player and the kinds of cabling you choose can make a noticeable
difference in picture and sound quality. Before you select one of the options, please make sure that your other
equipment (e.g. TV, receiver) has the required input/output channel.
Use either options of below:
For good picture quality, use COMPOSITE
VIDEO CABLE
For best picture quality, use COMPONENT
VIDEO CABLES
For better picture quality, use S-VIDEO
CABLE
Notes on Progressive Scan:
1. If your TV can accept Progressive Scan
feeds, your video connections should be
done as in the picture on the left to
obtain best possible picture quality from
the player.
2. Once connected, press the "P SCAN"
key on remote control or go to
"DISPLAY" of On-Screen Display to
activate the feature. A warning message
will pop up for confirmation.
3. Your TV may need adjustment to accept
Progressive Scan feeds.
4. Do not substitute a component Video
cable with an Audio/Video cable.
Although these types of cables do look
alike, the actual wires inside the cable in
which the signal passes along are very
different. Substituting cables will result in
poor picture and sound quality and could
damage your equipment.
Page 7