Advertisement
Setting The Time Zone:
The data & time of the tracker uploaded to the website is GMT time (add or minus a fixed digit is your local time),
you can send a SMS to the tracker to change your upload time from GMT to your local time automatically. Send
SMS "TIMEZONE*123456*XXX" to the tracker, in which, "TIMEZONE" is the fixed command, "123456" is the
password and XXX is the time zone of your local time. It is from -12 to +12, for example: New York is -05, Paris is
+01. Having successfully been set, there will be a SMS "TIME ZONE XXX".
Note: please confirm your local time zone, and if the time zone is not set, the tracker will upload tracking with GMT
time.
Set Website Server IP:
Send SMS "IP*123456*113.106.89.149,9066" to the tracker, in which, "IP" is the fixed command, "123456" is the
password and "113.106.89.149,9066" is the IP address of the server computer of our website. Having successfully
been set, there will be a SMS "IP:113.106.89.149,9066". However, the IP address may be changed with the
upgrade of our service which will be mentioned on the website.
Note: The tracker has a default IP address is: "113.106.89.149,9066". It is not necessary to set again, unless our IP
address has been changed or your setting has been changed, If the IP is changed, it will be displayed on the
website.
Set APN name:
For some mobile service providers, the APN name must be set to get through the internet by GPRS. Send SMS
"APN*123456*apn name" to the tracker, in which, "APN" is the fixed command. "123456" is the password and "apn
name" is the APN name of a mobile service provider. Having successfully been made, there will be a SMS "APN:
apnname".
Note: Some mobile service providers it is not necessary to set a APN or GPRS username & password, please
contact your mobile service provider to confirm this.
Set GPRS User Name & Password:
Send SMS "USERNAME*123456*username *password" to the tracker, "USERNAME" is a command, "123456" is
the password of the tracker; "username" is the mobile service provider's GPRS user name. "password" is the
mobile company GPRS password, if the operation is successful then the tracker will send back the information.
"Username: username, Password: password", please call the mobile service provider to get the GPRS username
and password, some mobile service providers do not need the GPRS username and password. If the password is
not right then the tracker will send back information "Wrong Password"
Note: Before uploading the tracking, the user needs to set IP, APN, GPRS user name & password (2G GSM
network APN, GPRS name & password). This only needs to be set once, this will be then saved in the tracker. But
if the tracker is set back to default, then these setting need be set again.
Add/ Delete /Check preset number:
The preset phone number is used to send alarm information by SMS, or use mobile phone to locate the tracker
without platform. If the preset phone number is not set, then the alarm information can not send to the user by SMS
(battery low, SOS, etc).
1. Add preset phone number by SMS
Send SMS"ADDPHONE*123456*A*number"(Not including the quotation marks " ", Number means the telephone
number you want preset) to tracker is OK, "ADDPHONE" is a command; "123456" is password; "A" is preset
number location, every tracker has 3 preset phone number locations, A and B, and C. So you can preset 3 phone
numbers. If the add operation is successful, the tracker will send back the information "Add Preset Phone OK", if
Advertisement
