NorthStar Multi-Function Unit M121 Installation And Operation Manual page 17

2-7-1 Multi window displays
The M121/M84 can show up to four windows
at once, for example Chart, Sonar, Gauges and
Video:
Adding a window to the display
Press , select Add window and select a
DISPLAY
window to add. The M121/M84 automatically
rearranges the display to show the new
window.
Changing window size
1 Press and select Split ratio.
DISPLAY
2 Press or to change the width of the
windows. If the M121/M84 is displaying three
or four windows, press
the height of the windows.
Note: Some windows are fixed in size.
The active window
If there is more than one window displayed, the active window is indicated by a red border. To
change the active window to the next window, press
Pressing will display the options menu for the active window.
MENU
Chart is active
16
or to change
Red border
Press
Press
Northstar M121/M84 Installation and Operation Manual
3 Press .
ENTER
Deleting a window from the display
1 Press until the window you want to
delete has a red border.
2 Press and select Delete window.
DISPLAY
Exchanging two windows on the display
1 Press until the first window has a red
border.
2 Press , select Replace and select the
DISPLAY
second window.
The M121/M84 exchanges the two windows.
Replacing a window on the display
1 Press until the window that you want
to replace has a red border.
2 Press , select Replace and select a new
DISPLAY
window that is not currently visible.
Note
1 When some windows are small then not all
the data is shown.
2 Set up commonly used displays as favorites
and press to switch between displays
(see section 2-7-2).
.
Sonar is active