SECTION FOUR — Troubleshooting and
Common 491
installation
problems
The status LED
491 INSTALLATION MANUAL Revision A
Typical problems you may encounter either during or after the 491
installation process are outlined in Figure 12 on page 22 and Figure 13 on
page 23.
In the 961/962, the diagnostics screen may also help pinpoint a problem.
The two-color LED located behind the 491's front-panel STATUS window
displays the unit's current condition.
The LED presents the following information:
•
solid green: System has power, self-test passed, and communicating
with navigator.
•
Flashing green: 491 is not communicating with the navigator.
•
Red: Self-test failed
servicing the 491
PAGE 21