Setup > System - NorthStar EXPLORER 657 Installation And Operation Manual

17-1 Setup > System
Press twice, then select System:
Language
Select the language for the displays.
Tip: In case you can't read the current
language, the language setting is found at the top
of the system menu.
Backlight
Select the backlight level for the keys and display
(see also section 2-3)
Night mode
Night mode sets the palette for all displays.
Normal palette, for daytime
All displays have a palette optimised for night
time.
See also section 2-3. To change only the chart
palette, see section 17-2.
Key beep
Enables or disables the beep when a key is pressed.
Auto power off
See section 2-2.
Factory reset
This option returns all of the 657 settings (except
the language, waypoints and routes) to the default
factory settings shown on the setup menus.
About window
The about window shows:
• The software version and date.
• The world chart version.
• Any card fitted.
•
•
In the unlikely event of having to contact a
Northstar dealer for service, quote the software
version number and date.
Sonar
See section 18-6.
SmartCraft™
See section 18-8.
AIS
See section 17-11.
Buddy track
See section 18-8
Northstar Explorer 657 Installation and Operation Manual
The number of waypoints, routes and tracks
you have stored.
Connector wiring information.
Disable any sonar transducer and disable sonar
functions.
A sonar transducer is fitted. Enable sonar
operation.
No SmartCraft™ gateway is fitted. Disable
SmartCraft™ functions.
SmartCraft™ gateway is fitted. Enable
SmartCraft™ operation.
No appropriate AIS receiver is fitted. Disable
AIS.
An appropriate AIS receiver is fitted.
Enable AIS.
No DSC VHF radio is fitted. Disable Buddy track.
A DSC VHF radio is fitted. Enable Buddy track.
61