Do you have a question about the COMPACT KS10 and is the answer not in the manual?
Questions and answers
Summary of Contents for Errebi COMPACT KS10
Page 1
KNIVES AND SCISSORS SHARPENING MACHINE (by Fazzini Technology) USE AND MAINTENANCE MANUAL COMPACT KS10 MODEL SERIAL NUMBER ERREBI S.p.A. Via Pianezze, 42-49 32040 CIBIANA DI CADORE - ITALY Tel. 0435-542500 Fax 0435-542522 info@errebispa.com www.errebispa.com...
All machines are factory tested before shipment. A different use of the machine as that foreseen in this manual is forbidden. The company Errebi Spa disclaims all responsibility for the improper use of the machine.
Leq dBA machine on : 80,5 dB Leq dBA sharpening : 81,8 dB Data taken at 10 cm from the ear of the operator . Height of the operator 173 cm . ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
If the machine it is provided by the R.P.S. , it is necessary assemble it on the front structure . Place it in the perfect centre and before to start the machine verify manually that the R.P.S. do not touch the wheels . ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 8
FIG. 1.4 FIG. 1.5 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
The machine should be cleaned only with a dry cloth and/or a vaccum cleaner; keep the machine clean ; ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
it should be aware that the blade can be dangerous if it is not handled correctly. Unauthorized personnel cannot work with the machine and/or carry out any operation. ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
The machine is equipped by a safety device ( 21 ), which can be easily pushed under all possible anomalous or dangerous conditions. To deactivate the safety device it is necessary to turn it as indicated on the bottom . FIG. 3.1 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Clean the blades before sharpening. Dirty blades would cause deposits that endanger the wheel effectiveness KNIVES SHARPENING OPERATOR’S POSITION ( FIG. 3.2) The figure 3.2 shows the correct position of the operator during the knife sharpening . FIG. 3.2 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 13
. In this case the free hand can be leaned on the top part of the R.P.S. , but without any pressing . During the sharpening operation the R.P.S. will follow the movement . ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 14
It is of great importance that the sharpening steel has a very fine grain. The commonly used sharpening steels are not suitable for this operation. We suggest the use of the ceramic-coated sharpening steel produced by our company (art. FR300-300) . ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 15
FIG. 3.3 CORRECT FIG. 3.4 FIG. 3.5 CORRECT FIG. 3.6 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 16
NOT CORRECT FIG. 3.7 NOT CORRECT FIG. 3.8 FIG. 3.9 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 17
2 or 3 times keeping the inclined surface as a reference ; turn the scissors and sharpen the other blade; repeat the operation until obtaining the required edge. FIG. 3.10 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 18
Fig. 3.11 CORRECT FIG. 3.12 NON CORRECT FIG. 3.13 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
The special maintenance includes all repairs caused by failures or wear of components except the wheels. WARNING : Before carrying out any special maintenance operation, contact the manufacturer. ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
7/8 mm pin from the wheel (2) ; check the rotation of the wheels manually , any contact should be between the wheels ; assemble the front structure (14) and the basement (15). ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 21
The wheels should be replaced by personnel of the mechanical workshop and/or specialized personnel equipped with the suitable tools. ATTENTION: use only wheels supplied by the manufacturer. The removed wheels should be disposed of as scrap and not in the environment. ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 22
FIG. 4.1 ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 23
TYPE : PROFESSIONAL KS100 SERIAL NUMBER : YEAR OF BUILT : is in conformity with the machinery directive 2006/42/CE . NAME : Patrizio SURNAME : Fazzini POSITION : Owner Introbio : ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 24
ELECTRICAL DIAGRAM EMERGENCY STOP INT. AUT O-I WITH COIL 110 V – 60 HZ SYMBOLS HAZARD WARNING SYMBOL WEAR EYE PROTECTION ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Page 25
The warranty is not valid in case of damages and/or failures depending on negligence and/or inexperience. The warranty is not valid if the customer performs any change to the machine. ERREBI S.p.A. Sharpener model COMPACT KS10 Use and maintenance manual Version 01-2013...
Need help?
Do you have a question about the COMPACT KS10 and is the answer not in the manual?
Questions and answers