Avtek TouchScreen 65 User Manual page 21

3. After selecting the number of points, you can start the calibration process by pressing
the calibration button. Then you will see the screen as follow.
4. Please touch the center of the point on the left top of the screen with the stylus.
While you are touching the point, you can see the counter from 0 to 100 on the
center of the screen.
Counter will count up to 100.
5. Please do not lift the stylus from the point and do not move any other side until the
"Collect Completed" text displayed on the screen. After that another point will
appear on the screen for calibration process. Please apply the same process to each
point. After finishing all points on the screen the text will be displayed as follow.
6. Please click the "OK" icon to complete the calibration process.
( 0 / 100  100 / 100 )
19