Samsung DW80H997 Series User Manual page 28

tzozAb ,shoot ncj
INFORMATION CODES
The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
i OC ii ii ii ii ii
Over-level water check
• Functional check. Close the water supply valve and go to your house circuit
breaker panel, set the dishwasher's circuit breaker switch to off, and then
contact an authorized Samsung service centre.
Leakage check
• If a water supply valve connection leak occurs, close the water supply valve
LC and go to your house circuit breaker panel, set the dishwasher's circuit breaker
switch to off, and then contact the installer to fix.
If the problem continues, contact an authorized Samsung service centre.
Water supply check
• Check if the water supply valve is closed, the water supply is suspended, or the
40 water inlet valve or line is frozen or clogged by foreign particles.
If the problem continues, close the water supply valve, and then contact an
authorized Samsung service centre.
Drain check
• After closing the water supply valve, check whether the drain hose is clogged or
50
folded. Also, check whether drain hole inside sump is clogged.
If the problem continues, contact an authorized Samsung service centre.
High temperature heating check
Functional check. With the dishwasher empty, add detergent, and then run a
Hc cycle.
If the problem continues, go to your house circuit breaker panel, set the
dishwasher's circuit breaker switch to off, and then contact an authorized
Samsung service centre.
Pump operation check
30 . Functional check. Turn off the dishwasher and try to start it again.
If the problem continues, contact an authorized Samsung service center.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
English o 28
I D1,*TSOH9950 00149A 04 EN 141224indd S_,c7:28