Power On/Off The Device; Touch Pad - iCraig CLP290A Owner's Manual

USB Ports (Full size USB port)
This device supports USB devices such as USB thumb Drive to increase the memory size and
to read files, simply insert the device into the USB port as indicated as below.
Notes:
A. Before replacing the USB DRIVER make sure the unit has been powered off.
B. When inserting the USB DRIVER, make sure the direction you select is correct. Never insert
violently to avoid damaging the USB driver or the unit. If it doesn't work, please check if the
direction is correct.

Power on/off the Device

A. Press and hold the Power
B. T o save power of battery. Press the Power
off the screen. Press it again to turn the unit on.
C. T o power off the device, press and hold the Power
menu appears on the screen. Move the cursor to the Power off button and then click the left
button. "Power off" menu will appear, move the cursor to "OK" button then left click it.
Notes:

Like your computer, after turning on the Device, you may have to wait a short
while to let the operating system boot up before the home page appears on the
screen.

Touch Pad:

T ouch the pad to move cursor on the screen as desired. Press the Left or Right button to do click
action.
Reset:
If the device becomes abnormal, halts, freezes. Press the RESET Button.
On/Off button beside the keyboard to power on the unit
On/Off button or
10
(Sleep) button to turn
On/Off button until the sub-setting