Programming The Cd Tracks; Program Play - Sony MHC-GN900 Operating Instructions Manual

• An album that does not include an MP3 audio track
• Maximum album number: 150 (including root
• The maximum number of MP3 audio tracks and
• Playback is possible up to 8 levels.
• Playback follows the recorded order of albums and
• There may be an exception to these rules depending
• Depending on the encoding/writing software,
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played back.
1
2
3
4
Downloaded From Disc-Player.com Sony Manuals
is skipped.
folder).
albums that can be contained in a single disc is 300.
tracks on the disc.
on the disc.
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot playback, sound
interruptions, and noise.
Programming the CD
tracks
Press CD.
Press PLAY MODE repeatedly until
"PGM" lights up in the display.
Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears on the
display.
Press . or > repeatedly until the
track you want appears in the display.
Total playing
Disc tray Track time (including
number number selected track)
ALL DISCS
SURR
EFFECT
V - GROOVE
A
5
Press PUSH ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on other
discs
7
Press hH.
Other Operations
To
Cancel Program Play
Clear a track from
the end
To program the MP3 audio tracks
After step 3, press ALBUM +/– repeatedly
until the album you want appears, then proceed
to step 4.
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
hH to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
LINK LINK
B
MHC-GN800 4-244-569-11 (1)
Repeat steps
3 and 5
4 and 5
3 to 5
Do this
Press PLAY MODE
repeatedly until "1 DISC" or
"ALL DISCS" lights up in
the display.
Press CLEAR on the remote
when playback is stopped.
GB
13