NEC NP-M403X Reference Manual page 14

Item
DATA01 Error status (1)
Bit0
Bit1
Bit2
Bit3
DATA02 Error status (2)
Bit0
Bit1
Bit2
Bit3
DATA03 Error status (3)
Bit0
Bit1
Bit2
Bit3
DATA04 Error status (4)
Bit0
Bit1
Bit2
Bit3
DATA05 - 08 Reserved for the system
DATA09 Extended status
Bit0
Bit1
Bit2
Bit3
DATA10 - 12 Reserved for the system
<Error information list>
Cover error
Temperature error (bi-metallic
strip)
None (fixed to 0)
Fan error
Lamp (or lamp 1) usage time
exceeded the limit
Formatter error
Lamp 2 off
None (fixed to 0)
None (fixed to 0)
FPGA error
Temperature error (temperature
sensor)
Lamp (or lamp 1) not present
Lamp 2 not present
Lamp 2 data error
Temperature error due to dust
Foreign matter sensor error
The portrait cover side is up
The interlock switch is open.
System error has occurred.
(Slave CPU)
System error has occurred
(Formatter)
14
Description
Bit4 Fan error
Bit5 Power error
Bit6 Lamp (or lamp 1) off
or backlight off
Bit7 Lamp (or lamp 1) in a replacement
moratorium
Bit4 None (fixed to 0)
Bit5 None (fixed to 0)
Bit6 None (fixed to 0)
Bit7 Refer to the extend status.
Bit4 Lamp (or lamp 1) data error
Bit5 Mirror cover error
Bit6 Lamp
moratorium
Bit7 Lamp 2 usage time exceeded the
limit
Bit4 None (fixed to 0)
Bit5 Ballast communication error
Bit6 Iris calibration error
Bit7 The lens is not installed properly.
Bit4 None (fixed to 0)
Bit5 None (fixed to 0)
Bit6 None (fixed to 0)
Bit7 None (fixed to 0)
2 in a replacement