Note: The Miccus SR-71 Stealth headphones will only use the APTX Low Latency codec with other transmitting devices that support aptX Low Latency. Otherwise the SR-71 Stealth will default to the standard aptX or SBC codec. If television or video audio is your primary use for aptX Low Latency, it is recommended that you purchase a Bluetooth transmitter...
Search for Bluetooth devices within range and select “Miccus SR-71” from the list of devices shown. 5. Enter pass code “0000” and press “OK” to pair the SR-71 Stealth with your mobile phone. When the pairing is completed, the LED indicator will flash blue once every 3 seconds.
Answer a call When a call is incoming, the ring tone will be audible in the SR-71 Stealth headphones. Press and release the MFB once to answer the call, or remove the SR-71 Stealth headphones and answer the call directly on your phone.
Adjusting the Volume: When you are using the phone or listening to audio Press and release the “+” button (2) to increase volume by one increment at a time until the SR-71 Stealth beeps to indicate you have reached full volume.
• Avoid charging the headphones in extreme temperature conditions. • Built-in Battery • Do not attempt to replace the SR-71 Stealth’s battery as it is built into the headphones and is irreplaceable. • • Charge the battery in accordance with the instructions supplied in the user manual.
Page 7
This device and its antenna(s) must not be co-located or in conjunction with any other antenna or transmitter. Miccus Inc. has made every effort at the time of print to ensure the accuracy of the information provided herein, product specifications configurations, warranty, pricing, system/component/options availability are all subject to change without prior notice.
Need help?
Do you have a question about the SR-71 and is the answer not in the manual?
Questions and answers