Option Menu - Panasonic TH-42LF30ER Service Manual

Option Menu

LA29 chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful for
special function required customers. This should be set at the installation stage.
Option menu
On screen display
Initial input
Failower input
Initial VOL level
Maximum VOL level
Input lock
Button lock
Remocon User level
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Serial Daisy Chain
Studio W/B
Slot power
Power ON Screen Delay
Clock Display
Power On Message (No activity power off)
Function button assign 1
Function button assign 2
Note:
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote ID"
adjustments, set all the values "Off" so that all the buttons are enabled again. Press the "Volume down" button on main unit
together with "R" button on the remote control and hold for more than 5 seconds.
Default setting
On Enable/disable to display input mode indication after power on and
no signal indication.
Off Sets the initial input mode when the power is turned on. Allow input
mode selection while power is on.
Off When there is no signal, the specified input signal is automatically
switched to.Off
PC
* "SLOT INPUT" is displayed when an optional Terminal Board is
installed
Off Sets the initial volume level when the power is turned on. Allow
Volume control while power is on.
Off Sets the maximum volume to desired level. Volume cannot exceed
this level.
Off Fixes the input mode to PC, SLOT INPUT, VIDEO,
Component/RGB, HDMI or DVI. Can not change input mode by
input selection key.
Off Enable/Disable bottom operation buttons (Input, Menu, Enter
and/or volume up/ down).
Off Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, RECALL,
Sound mute On/Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Enable Off-timer operation Enable/Disable.
Normal Sets the power mode of the unit for when the power recovers from
failure or after plugging off and in again.
0 Sets panel ID number when panel is used in "Remote ID" or "Serial
ID".
Set value range: 0 – 100
(Standard value: 0)
Off Remote ID function On/Off.(While the Remote ID on, standard
remote function can not control the unit.)
Off Serial ID function On/Off
Off Sets the top and end of a daisy chain when the SERIAL terminal of
Display is daisy chained.
Off Studio W/B function On/Off
Off Sets the slot power mode while the power is turned on.
Allow Optional Terminal Board insert Slots while power is on.
Off You can set the power-on delay time of the displays to reduce the
power load, when you press
that are set together, for example, on MULTI DISPLAY system.
Set each display's setting individually.
Off Clock Display function On/Off.
On Whether to show/hide No activity power off Precautions at the time
of power ON is set.
Signal
Set the functions that operates when
Screensaver
12
Contents
Slot Input Video
DVI HDMI1 HDMI2
to turn on the multiple displays
Component/RGB
Off
is pressed.