Table of Contents
Advertisement
Add call to initiate a 3-way call.
n
End to end the current call.
n
Dialpad to display the dialpad to enter additional numbers, for example, an extension or access
n
code.
For example: When you call your bank's 800 number, use your dialpad to enter your account
l
number and PIN.
Speaker to route the phone's audio through the speaker (On) or through the earpiece (Off).
n
Activate the speaker to route the phone's audio through the speaker. (You can adjust the
l
speaker volume using the volume buttons.)
Deactivate the speaker to use the phone's earpiece.
l
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Mute to mute the microphone during an active call. Tap again to unmute the microphone.
n
Bluetooth (Only available when a Bluetooth headset is connected to your phone) to route the
n
phone's audio through a connected Bluetooth headset (On) or through the speaker (Off). For
details about pairing the phone with a Bluetooth headset.
When the call is routed to a Bluetooth headset, the current call area shows the Bluetooth call
l
icon (
).
Note: The Headset button is activated to show the current call is routed to the connected Bluetooth
headset.
To route the current call back to the phone, tap Bluetooth to temporarily use the phone. Tap
l
it again to route the call back to the connected Bluetooth headset.
Phone App
46
Advertisement
Table of Contents
