Summary of Contents for Link free trainer
- Page 1 Revision 0 June 2011 Free Trainer Owner’s Manual Serial Number Here Date of Purchase www.batcafitness.com Link Free Trainer Owner’s Manual 1207 New Hope Road, Raleigh, NC - 919.255.1233 - www.batcafitness.com...
- Page 2 Instructions Congratulations on the purchase of your new Batca Link Free Trainer. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Batca Fitness Systems strives to build the best quality gyms and to package these gyms in such a way to avoid any damage during shipping.
-
Page 3: Tools Required
QTY. BFH-50242 3/8” Fender Washer BFM-51173 Weight Stack Pull Pin BFC-50123 Ankle Strap Tools Required BFC-50132 Tricep Rope BFC-50126 Short Bar 9/16” Wrench 9/16” Ratchet Allen Wrench Set Tape Measure www.batcafitness.com Link Free Trainer Owner’s Manual... - Page 4 Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 5 Link Free Trainer Owner’s Manual...
- Page 6 Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 7 Link Free Trainer Owner’s Manual...
- Page 8 (BFM– 10939 item no. 2 ) in Step 1a as opposed to the right cage BFP-51750 SHCS 3/8” x 2 3/4” (BFM-10932) in Step 1. BFP-51799 SHCS 3/8” x 5” BFH-50204 3/8” Curved Washer BFH-50157 3/8” Nylock Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 9 SHCS 3/8” x 5” Pulley Adjustment (BFM-10932) in Step 3. BFH-50204 3/8” Curved Washer BFH-50146 3/8” Flat Washer BFH-50157 3/8” Nylock All Flat Washers and Nylocks are 3/8” unless otherwise noted BFH-50242 3/8” Fender Washer www.batcafitness.com Link Free Trainer Owner’s Manual...
- Page 10 Anywhere a washer is against BFH-50204 3/8” Curved Washer the round side of a tube there is to be a 3/8” CURVED WASHER 3/8” FLAT instead of a BFH-50146 3/8” Flat Washer WASHER. BFH-50157 3/8” Nylock Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 11 Guide Rod Plate BFP-51745 Guide Rod BFM-10413 Top Weight Plate BFM-50632 Weight Stack Plate BFM-50529 Rubber Donut BFM-51173 Weight Stack Pull Pin BFP-51760 SHCS 3/8” x 3 1/2” BFH-50146 3/8” Flat Washer BFH-50157 3/8” Nylock www.batcafitness.com Link Free Trainer Owner’s Manual...
- Page 12 Plastic Collar 63 BFP-51799 SHCS 3/8” x 5” 42 BFH-50221 3” Plastic Washer 64 BFH-50204 3/8” Curved Washer 43 BFH-50238 65 BFH-50146 3/8” Flat Washer 44 BFH-50239 Snap Ring 66 BFH-50157 3/8” Nylock Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 13 4 1/2” Pulley BFP-52091 1/2” Pulley Spacer BFP-51759 SHCS 3/8” x 2” BFH-51750 SHCS 3/8” x 2 3/4” All Flat Washers and Nylocks are 3/8” unless otherwise noted. BFH-50146 3/8” Flat Washer BFH-50157 3/8” Nylock www.batcafitness.com Link Free Trainer Owner’s Manual...
- Page 14 1/2” into the Top Plate of the weight stack. Each must also be secured with a 1/2” Jam Nut to ensure a safe and proper 273 1/16” connection. CAB-15014 large ball Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 15 3/8” Curved Washer otherwise noted. Anywhere a washer is against BFH-50146 3/8” Flat Washer the round side of a tube there is to be a 3/8” BFH-50157 3/8” Nylock CURVED WASHER instead of a 3/8” FLAT www.batcafitness.com Link Free Trainer Owner’s Manual...
- Page 16 Step 8: Make sure all bolts are tightened Figure 8 Item # Part # Description BPF-51742 Right Front Weight Stack Shroud BFP-51741 Left Front Weight Stack Shroud Batca Fitness Systems Link Free Trainer Owner's Manual...
- Page 17 1/2” into the Top Plate of the warranty. weight stack. Each must also be secured with a 1/2” Jam Nut to ensure a safe and proper connection. Guide Bolts www.batcafitness.com Link Free Trainer Owner’s Manual...
-
Page 18: Cable Adjustments
Note: If the top plate raises off of the second plate in the weight stack, then the cable ten- sion is too tight. You will need to take some of the tension out to lower the Top plate flush with the second plate. Batca Fitness Systems Link Free Trainer Owner's Manual... -
Page 19: Preventive Maintenance
Upholstery Hand Grips Roller Pads Guide Rods Chrome Slides Frame Inspect Overall Safety Decals Cables Cable Tension Pulleys Hardware Stops Upholstery Hand Grips Frame Bushings Bearings Lubricate Guide Rods As Needed Bearings Replace Cables www.batcafitness.com Link Free Trainer Owner’s Manual... -
Page 20: Limited Lifetime Warranty
This warranty applies only to the original purchaser and is not transferable. Claims under this war- ranty must be made directly to Batca Fitness Systems. Batca Fitness Systems 1207 N. New Hope Road Raleigh, NC 27610 (919) 255-1233 www.batcafitness.com Batca Fitness Systems Link Free Trainer Owner's Manual... - Page 21 Layout Diagram The Link Free Trainer has a layout dimension of 2’-9” (width) x 7’-1” (length) x 7’-5” (height). There should be a minimum of 18”, preferably 24”, of working space around the entire unit. www.batcafitness.com Link Free Trainer Owner’s Manual...