Nortel 2300 Series Configuration Manual page 193

Figure 2 shows the client support when the default encryption settings are used. A radio using the default encryption
settings encrypts traffic for non-WPA dynamic WEP clients but not for WPA clients or static WEP clients. The radio
disassociates from these other clients.
Figure 2. Default Encryption
User A
Dynamic WEP
Non-WPA
This rest of this chapter describes the encryption types and how to configure them, and provides configuration scenarios.
WLAN Security Switch
User B
Dynamic 40-bit WEP
WPA
Nortel WLAN Security Switch 2300 Series Configuration Guide
Configuring User Encryption 193
Encryption settings:
-WPA disabled
-Dynamic WEP enabled
-Static WEP disabled
User C
Static WEP
Non-WPA
User D
TKIP
WPA