Technical Data; Declaration Of Conformity; Intended Use - Bosch AMW 10 Original Instructions Manual

OBJ_BUCH-1668-002.book Page 9 Monday, October 21, 2013 3:45 PM
For products not sold in GB:
WARNING: For your safety, it is required that the plug at-
tached to the machine is connected with the extension cord.
The coupling of the extension cord must be protected against
splash water, be made of rubber or coated with rubber. The
extension cord must be used with a cable strain relief.
The connection lead must be inspected for signs of damage at
regular intervals and may only be used if in perfect condition.
If the supply cord is damaged, it must be replaced by a Bosch
Service Centre.
Extension cords/leads should only be used if they comply
with H05VV-F or H05RN-F types.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Wear protective gloves
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts

Intended Use

This power unit is only suitable for Bosch Multi-tool attach-
ments and intended for private gardening.
Bosch Power Tools

Technical Data

Power Unit
Article number
Rated power
No-load speed
Adjustable handle
Extention pole
Weight according to
EPTA-Procedure 01/2003
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden
product. The trade names of the individual garden products may vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with the fol-
lowing standards or standardization documents: EN 60335
according to the provisions of the directives 2011/65/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC.
Heavy Duty Trimmer Attachment
2000/14/EC: Guaranteed sound power level 96 dB(A).
Equipment category: 33
Pole Hedgecutter Attachment
2000/14/EC: Guaranteed sound power level 103 dB(A).
Equipment category: 25
Pole Pruner Attachment
2000/14/EC: Guaranteed sound power level 107 dB(A).
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
14.10.2013
Noise/Vibration Information
The following information is applicable for the attachment op-
erated by the power unit.
Pole Pruner Attachment
Measured sound values determined according to
EN ISO 11680.
English | 9
AMW 10
3 600 HA3 0..
W 1000
-1
min 11400

mm 700
kg 4.2
/II
see type plate on the
garden product
F 016 L70 915 | (21.10.13)