Getting Started; Install Memory Card; Battery And Charging - Easiphone EP 002 User Manual

Table of Contents

Advertisement

3.1 Install your SIM card
Please turn off your phone before install your SIM card. The SIM slot is
inside your phone. If you insert an incompatible or broken SIM card, the
display will show "Input SIM Card" when the phone is switched on.
Notice:SIM cards and Memory cards are small items,please keep
them out of the reach of children.

3.2 Install Memory Card

If you wish to use functions such as playing music then you will need to
install an additional memory card.
To install a memory card:
• Switch off the phone
• Open the back cover and take the battery out
• The memory card slot is on the right of the rear compartment
• Push the retaining cage to the right until it clicks. Then open it.
• Place the memory card into place and close the retaining cage
clicking it to the left to secure the card into place.

3.3 Battery and charging

●Please use the battery provided by the manufacturer and install it
carefully to avoid breaking the battery contacts.
●If your phone get a little hot when charging, it is normal. Please do not
be concerned.
3.4 Turn on / off
● Press and hold the red phone symbol key to turn your phone on and
off. If there is a password needed, input your password and press "OK".
The default password is "0000".
●If your phone needs a PIN code, please check that with your network
provider.

3 Getting Started

Advertisement

Table of Contents
loading

Table of Contents