Operating the Blink Warning Screen
When the blink warning screen shown at right is
displayed in the monitor, the operations described
below are available.
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
To
Enlarge the detected
face that blinked
Switch to full-frame
playback
Delete the picture
Switch to shooting
mode
B
Note on Blink Warning
The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
Use
Rotate the zoom control to g (i).
If the camera detects that more than one human
g (i)
subject blinked, tap M or N to switch display to
another face.
f (h)
Rotate the zoom control to f (h).
E
Tap E.
I
Tap the monitor, I, or H. The shutter-release
button can also be pressed to return to shooting
H
mode.
Setup Menu
Did someone blink?
Description
153