Summary of Contents for Zhejiang IFU-MIET
- Page 1 Instruction for Use (File No.: IFU-MIET) Version: 01 Mobile Infra-red Ear Thermometer Zhejiang Medzone Medical Equipment Co.,Ltd...
- Page 2 1 Preface Dear Customers, thank you for purchasing the Mobile Infra-red Ear Thermometer. This instruction for use describes the characteristics and technical requirements of the device, main structure, performance, specifications, transportation, usage, operation, maintenance and storage methods, safety measures are also included, please see specific chapters.
- Page 3 2.1.4 Attentions Don’t touch the infra-red sensor by hand or blow it with mouth. Damaged or dirty infra-red sensor may cause incorrect measure results. When the infra-red sensor is dirty, it is advised to wipe softly with soft dry cloth, using sanitary paper or paper towel to wipe will hurt the infra-red sensor, which will produce incorrect measure results.
-
Page 4: Product Brief
Temperature range Avoid sunlight Humidity range Up toward Keep dry 3 Product brief 3.1 Product characteristics The Mobile Infra-red Ear Thermometer has a small size, low power consumption, easy to use and carry. During measurement, insert the hardware into the mobile audio port, and direct the infra-red probe facing the ear canal, the mobile screen will immediately display the measured temperature value, the device has high accuracy and repeatability. -
Page 5: Method Of Use
4.2.2 To refer the battery cover reed polarity direction, insert into one 3V button battery; 4.2.3 Close the battery cover. Warnings: When the oxygen terminal appears low voltage, please change the battery in time. If it is not used for a long time, remove the battery, so as to avoid battery leakage. 4.2 Installation and use of the Mobile Infra-red Ear Thermometer management software, see “Rapid use manual of mobile Mobile Infra-red Ear Thermometer”... -
Page 6: Specifications
high environment Use the device on required temperature environment Interference happen wrong Leave the interference source, operation use according to IFU Clean the ear canal, and Earwax is too thick measure again. Orange lamp flashing, Low battery Change the battery voltage The software can hardware... - Page 7 Classification of electric shock type: internal power supply equipment Classification of electric shock degree: BF type Equipment Protection against liquid: IPX0 Running mode: continuous operation information Safety classification of using with flammable anesthetic gas or flammable anesthetic gas mixed with oxygen or nitrous oxide: Non AP/APG 9 Guidance and manufacturer’s declaration-electromagnetic emissions 9.1 Emission...
- Page 8 9.2 Immunity Test frequency: 50Hz, 60Hz; Continuous field: 3 A/m; Test duration: 5m; Antenna factor: 0.917A/m; Axis: X, Y, Z. Test results: No degradation of function, comply with EN 60601-1-2:2007+AC:2010, ISO 80601-2-56:2009 Clause 202, EN 60601-1-11:2010 Clause 12.