Safety Information; General Safety; Preparation; Operation - Qualcast GDB30B Assembly Manual

Safety Information

Important - Please read these instructions fully before operating or maintaining

General Safety

WARNING! Keep this operating and maintenance manual in a safe place for reference at a later
date.
WARNING! Read the instructions carefully. Be familiar with the controls and the proper use of the
equipment.
WARNING! Never allow children or people unfamiliar with these instructions to use the brush
cutter. Local regulations can restrict the age of the operator.
WARNING! Never trim while people, especially children, or pets are nearby. Keep in mind that the
operator or user is responsible for accidents or hazards occurring to other people or their property.
WARNING! This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
WARNING! Do not touch rotating spool and blade.

Preparation

a) Do not allow children or untrained individuals to use this unit;
b) Never start or run the engine in an enclosed or poorly ventilated area; breathing exhaust fumes
can kill;
c) Clear the work area before each use. Remove all objects such as rocks, broken glass, nails,
wire, or other such deris which can be thrown or become entangled in the cutting line or blade;
d) Wear safety glasses or goggles when operating this unit;
e) Wear heavy, long trousers, boots, and gloves. Do not wear loose fitting clothing, shorts, or go
barefoot. Do not wear jewellery of any kind.

Operation

■ Never operate this unit on the operator's left side.
■ Secure long hair above shoulder level to prevent entanglement in moving parts.
■ Keep all bystanders, children, and pets at least 15 m (50 ft.) away.
■ Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or
medication.
■ Do not operate it in poor lighting.
■ Keep firm footing. Do not overreach. Overreaching can result in loss of balance or exposure to
hot surfaces.
Customer Helpline 0845 034 2279
4
www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before operating or maintaining
Operation (continued)
■ Keep all parts of your body away from any moving parts.
■ To avoid hot surfaces, never operate the unit with the bottom of the engine above waist level.
■ Do not touch area around the exhaust or cylinder of the unit, these parts get hot during operation.
■ Always stop the engine and remove the spark plug cable before making any adjustments or repairs
except for carburetor adjustments.
■ Inspect the unit for loose fasteners, fuel leaks, etc.before each use. Replace any damaged parts
before use.
■ The string head will rotate during carburetor adjustments and engine starting.
■ It has been reported that vibrations from hand-held tools may contribute to a condition called
Raynaud's Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching
of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and
dampness, diet, smoking and work practices are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations or extent of exposure may contribute to
the condition. There are measures that can be taken by the operator to possibly reduce the effects of
vibration:
a) Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud's
Syndrome.
b) After each period of operation, exercise to increase blood circulation.
c) Take frequent work breaks. Limit the amount of exposure per day.
d) Keep the tool well maintained, fasteners tightened and worn parts replaced.
If you experience any of the symptoms of this condition, immediately discontinue use and see your
Doctor about these symptoms.
■ Mix and store fuel in a container approved for petrol clearly identified as 2-Stroke.
■ Mix fuel outdoors where there are no sparks or flames. Wipe up any fuel spillage. Move 9 m (30 ft)
away from refueling site before starting engine.
■ Stop the engine and allow to cool before refueling or storing the unit.
■ Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in
a vehicle.
Intended use:
This machine is also intended for cutting brush as a brush cutter and as a grass trimmer for
cutting grass and light foliage
Non-intended use:
This machine is not designed for trimming hedges or the like for which the machine needs to be
raised from the floor.
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
5