Starting The Appliance - Monster IB 35 Perfect Plus Instruction Manual

4. Starting the appliance

- Insert the plug of the ironing board into the mains socket.
- Insert the iron to the outlet under the ironing board.
- Remove the silicone blocking device (4) (fastened to the safety cap) and place the iron on the iron-rest
mat (2).
- Turn the appliance on [mains switch (7)]. The orange indicator light (11) in the iron lights up and stays
on. The indicator light (11) comes off as soon as the soleplate reaches the set temperature. The iron
warms in 3-5 minutes. Pushing the on/off button the ironing board starts warming as well. A built-in
thermostat steadily controls the warming temperature of the ironing board. While warming-up the
appliance may emit some noises. It is a normal phenomenon, that should not alarm you.
- As soon as the "ready-steam" indicator light (9) lights up the pressure has been reached and the
steam generator is ready to use. The steam generator warms up in about 10 minutes. This time may
be reduced using lukewarm water.
- For the suction function set the switch to the position "-"
- For the blowing function, set the switch to the position "+"
- To steam-iron all fabrics, set the temperature control (5) to the steam emission position.
- To steam-iron push the steam button (4) on the iron.
Power light
steam emission position
steam emission
24
on/off button
No water light
power indicator light
suction function
blowing function