Disassembly And Assembly Instructions - Samsung GT-B7702 Service Manual

11. Disassembly and Assembly Instructions

11-1. Disassembly
1
Torque
< Figure 1 >
1) Disassemble 6POINT of REAR SCREW [Figure 1]
1) Be careful not to make scratch and molding damage!
3
< Figure 1 >
1) Widen up_side of rear and push left and right to fully disassemble
the hooks
2) Push up_side of rear to disassemble the hooks on down_side.
1) Be careful not to make scratch and molding damage!
5
1) Hold low side of Front and bracket disassemble PBA ASSY and Front
ASSY.[Figure 1]
1) When disassembling, Be careful not to damage component nearby
.
connector
2) Be careful not to damage FPCB.
Screw(M1.4, L4.0)
1.1 ~ 1.3Kgf.cm
< Figure 1 >
< Figure 2 >
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Hook 2 Point
< Figure 1 >
1) Disassemble 2 Point OF LEFT REAR HOOK With Disassemble tool
.[Figure 1]
2) Disassemble 2 Point OF RIGHT REAR HOOK With Disassemble
tool.[Figure 2]
1) Be careful not to make scratch and molding damage!
4
TSP Connector
< Figure 1 >
1) Disassemble TSP CONNECTOR and take out the FPCB with TWEEZERS
[Figure 1]
2) Disassemble LCD CONNECTOR and take out the FPCB with
TWEEZERS.[Figure 2]
1) Be careful not to damage FPCB
2) When disassembling, Be careful not to damage component nearby
connector
6
Screw(M1.4, L3.5)
1.0 ~ 1.2Kgf.cm
Torque
1) Disassemble 5 point of Screws.[Figure 1]
11-1
Hook 2 Point
< Figure 2 >
LCD Connector
< Figure 2 >
< Figure 1 >