Disconnect Wi-Fi - Sharp AQUOS CRYSTAL User Manual

Network notification: When enabled, your phone alerts you when a new Wi-Fi network is
l
available.
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data for data
l
communications, when the device goes to sleep (when the backlight goes out). This setting
can affect data usage, since the data connection will remain active even when the phone
screen is off.
Scanning always available: When enabled, your phone will allow Google location service
l
and other apps to scan for networks, even when Wi-Fi is turned off.
Avoid poor connections: When enabled, your phone does not use a Wi-Fi network when
l
there is a poor connection.
Install certificates: If you have certificates stored on an installed optional memory card (not
l
included), you can use this option to install the certificates.
Wi-Fi optimization: Enable your phone to use as little battery as possible when using Wi-Fi.
l
MAC address: View your device's MAC address, needed for connecting to some secured
l
networks.
IP address: View your device's IP address.
l
Your Wi-Fi settings changes are saved.

Disconnect Wi-Fi

You may wish to disconnect from a connected Wi-Fi network without turning Wi-Fi off.
1. From home, touch
Connectivity
> Settings .
323