Download Print this page
Atmel ATAVRAUTOEK1 Getting Started
Atmel ATAVRAUTOEK1 Getting Started

Atmel ATAVRAUTOEK1 Getting Started

Atmel evaluation kit getting started section 1

Advertisement

Quick Links

1.1
Unpacking the system
ATAVRAUTOEK1
ATAVRAUTOEK1 Getting Started
Kit contents:
1 ATAVRAUTO100 V1.0 board
1 ATAVRAUTO102 V1.0 board
1 ATAVRAUTO200 V1.0 board
1 ATAVRAUTO300 V1.0 board
1 ATAVRAUTO900 V1.0 board
5 Cables for board connection
1 USB Mini-B to A cable
1 Getting Started
1 Automotive CD-Rom
1 AVR CD-Rom software and technical library
1 Dear customer letter
Note:
All boards are shipped with a demo firmware loaded. This guide gives you all
keys to plug and play the ATAVRAUTO evaluation kit demo.
Section 1
1-1
7700A–AUTO–06/07

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATAVRAUTOEK1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atmel ATAVRAUTOEK1

  • Page 1 Unpacking the system ATAVRAUTOEK1 ATAVRAUTOEK1 Getting Started Kit contents: 1 ATAVRAUTO100 V1.0 board 1 ATAVRAUTO102 V1.0 board 1 ATAVRAUTO200 V1.0 board 1 ATAVRAUTO300 V1.0 board 1 ATAVRAUTO900 V1.0 board 5 Cables for board connection 1 USB Mini-B to A cable...
  • Page 2 Overview ATAVRAUTOEK1 User Guide The ATAVRAUTOEK1 evaluation kit has been designed to give designers an easy and fast way to develop automotive applications. The evaluation kit is shipped with a board used as a vehicle network analyser (ATAVRAUTO102), a gateway between one LIN net- w o r k t o o n e C A N n e t w o r k ( ATAV R A U TO 1 0 0 ) , a D C m o t o r c o n t r o l b o a r d (ATAVRAUTO200) and a joystick board (ATAVRAUTO300).
  • Page 3: Quick Start

    Add the jumper to connect LIN0 to LIN1 ATAVRAUTOEK1 User Guide The ATAVRAUTOEK1 evalution kit contains 3 application boards (ATAVRAUTO100 /200 /300) and one board used as a tool(ATAVRAUTO102). All boards are shipped with a demo firmware loaded. To run the demo all boards have to be connected to one LIN.
  • Page 4 With standalone boards Figure 1-3. ATAVRAUTOx Boards connection ATAVRAUTO300 ATAVRAUTO100 ATAVRAUTOEK1 User Guide Connect your board as indicated below using the cables included in the kit and connect a DC voltage source (8 to 18V) to VBat. +8V to +18V VBAT...
  • Page 5 No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.