Montgomery Ward WQP8-9239L-US Instruction Manual page 6

How to Use
Wash Cycles
Wash Cycle Selection Cycle
Cycle Information Description
For the heaviest Pre-wash
soiled loads, such
Pre-wash (122° F)
as pots and pans,
Wash (127° F)
Heavy
casserole dishes
Rinse
and dishes with
Rinse (143° F)
dried on food.
Dry
For normally Pre-wash
soiled loads,
Wash (123° F)
Normal
such as pots,
Rinse
plates, glasses,
Rinse (152° F)
and lightly soiled
Dry
pans. Normal daily
operation.
For lightly soiled Pre-wash
loads, such as
Wash (122° F)
plates, glasses,
Light
Rinse
bowls and lightly
Rinse (131° F)
soiled pans.
Dry
A shorter wash for Pre-wash
lightly soiled items
Wash (122° F)
that don't need
Speed
Rinse (131° F)
drying.
Dry
Starting a Wash Cycle
1. Load the dishwasher per the recommendations on page 8.
2. Add detergent and rinse-aid as described on pages 6 and 7.
3. Plug in the dishwasher.
4. Connect the waterline to the adapter on the sink faucet.
5. Turn the hot water to full pressure.
6. Make sure the door is closed tightly.
7. Press the ON / OFF button.
8. Press the Wash Cycle button until your desired wash cycle is selected.
9. Press the Start / Pause button.
10
(cont'd)
Detergent Run Time
Amount (minutes)
Pre/Main
0.6 oz 125
0.6 oz. 95
0.6 oz. 85
0.5 oz. 65
Wards.com
Changing a Wash Cycle
Operation will stop if the door is opened during a wash cycle. Operation will con-
tinue ten seconds after the door is closed.
Water
Usage
(gal) WARNING: Opening the door during a wash cycle could allow scalding
water and steam to escape from the machine, causing personal injury or
4.41
property damage.
You can modify the wash cycle if the dishwasher has only run for a short time.
Otherwise, the detergent may have already been released and the appliance may
have already drained the wash water. If this is the case, the detergent dispenser
must be refilled.
3.54
1. Press the Start / Pause button.
2. Press and hold the Wash Cycle button for three seconds to cancel the current
wash cycle.
3. Press the Wash Cycle button until your desired wash cycle is selected.
4. Press the Start / Pause button.
3.54
Pausing a Wash Cycle
A forgotten dish can be added any time before the detergent cup opens.
WARNING: Opening the door during a wash cycle could allow scalding
water and steam to escape from the machine, causing personal injury or
2.7
property damage.
1. Press the Start / Pause button.
2. When the spray arms come to a rest, open the door.
3. Add forgotten dishes to dishwasher.
4. Close the door and press the Start / Pause button. Normal operation will re-
sume after three seconds.
At the End of the Wash Cycle
When the wash cycle has finished, the dishwasher's buzzer will sound for
eight seconds, then stop.
1. Turn off the appliance using the ON / OFF button.
2. Shut off the water supply.
3. Open the door a little ways and leave ajar for 15 minutes.
4. Allow dishes to cool before unloading to avoid handling hot dishes and utensils,
which are more susceptible to breakage.
How to Use
(cont'd)
1 888 557 3848
• • •
11