Page 4
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ DECLARATION OF CONFORMITY Annexed document II A, of directive 98/37/CE Manufacturer TECNOEKA Srl Address Via I. Nievo, 12/B - 35012 Camposampiero (Pd) Type of product Model KP 96 – KTP 96...
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ Index General warnings Positioning Instructions for installer Gas connection Electrical connection Adapting cook-top to different types of gas Instructions for use Cleaning and maintenance Technical assistance and original spare parts...
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 1. General warnings Read the warnings in this handbook carefully, as they provide important instructions on installation, use and maintenance safety. Store this handbook carefully for further consultation.
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ Technical data-plate - The technical data-plate (Fig.1) and the plate with the installation warnings (Fig. 2) are permanently and visibly fitted on the rear panel of the appliance. An additional plate – to be removed with all packing material –...
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 2. Positioning Mod. KP 96 - The appliance must be laid on a work table, away from furniture (class 1). The minimum distance from rear and side walls must be at least 10 cm.
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ Residual risks - Keep away from the appliance unskilled personel. - The appliance contains electrical parts and must never be washed with a jet of water or steam.
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 6. Adapting cook-top to different types of gas To adapt the cook-top to a different type of gas from the one used to test the device in the factory (see data plate or supplementary plate), replace the nozzles of the five burners and set the primary air flow by means of the appropriate tools.
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ an H distance from the base, respecting the value indicated in table 1. Tighten screw “V” again. - Having replaced the main nozzles of the burners and having adjusted the primary air, seal the adjusted tools with varnish.
Page 12
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ - Electric lighting of the burners with safety device - The cook-top is equipped with electric ignition of the burners by means of spark plug “A” (Fig. 7). The spark plug operates when the push-button on the control panel is pressed.
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 8. Cleaning and maintenance ATTENTION! Before any operation disconnect the electric supply and very that the gas tap is closed. Clean the appliance regularly to ensure best performance.
Page 14
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 10. List of spare parts COMPONENT TECNOEKA CODE Small open fire burner 01980828700 (2700 W, semi-fast) Medium open fire burner 01980838700 (3100 W, fast) Large open fire burner...
_ Hob _ rev. 0 _____________________________________________________________________ KP 96 – KTP 96 _ 11. The Guarantee Your new appliance is covered by guarantee. The relevant guarantee certificate is annexed to this handbook. To implement the guarantee send part B of the certificate duly compiled to TECNOEKA S.r.l., by and not late than 8 days from the date of purchase of the appliance (otherwise the appliance cannot be covered by a legal guarantee).
Need help?
Do you have a question about the KP 96 and is the answer not in the manual?
Questions and answers