Dimming Mode Selection Manual LED Intensity Level Settings Dimensional Drawings 5. Appendix A Quick Lesson On DMX Troubleshooting Keeping Your Solar Cell™ As Good As New Returns (Gasp!) Shipping Issues Tech Specs Page 2 Solar Cell™ User Manual - Rev. A...
• This Lovely User Manual Getting It Out Of The Box Congratulations on your purchase of the mega bright Solar Cell™ LED blinder effect that is built to outshine the competition (yuk, yuk)! Now that you’ve got your Solar Cell™ (or hopefully, Cells!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
• Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at www. blizzardlighting.com/support. Page 4 Solar Cell™...
Figure 1: The Solar Cell™ Pin-Up Picture Manual 20° Pendulum Angle 2* 100W Adjustment with 3200-3500K Locking Knobs Warm White LEDs Safety Cable Loop Mounting Bracket with Locking Knobs Figure 2: The Rear Connections 4-button Locking LED Control Knobs Panel...
Should your Solar Cell™ fuse require replacement, please contact Blizzard Lighting for instructions, or to return your unit for service. Connecting A Bunch of Solar Cell™ Fixtures You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in master/ slave operating mode.
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
After finding the desired position, retighten both knobs. • When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. • Safety cables MUST ALWAYS be used. Page 9 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the Solar Cell™ are accessed by using the control panel on the front of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus.
3.) You can now adjust the speed of the sound activated program by using the <UP/DOWN> buttons to choose a value from 00-99 (fast <--> slow). 4.) Press the <ENTER> button to confirm your selection. Page 11 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
2.) Press <ENTER>, then use the <UP/DOWN> buttons to highlight a value from 000-255 (0% <--> 100%), then press <ENTER>. Dimensional Drawings 7.9” (20 cm) 7.1” (18 cm) Page 12 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Install a Terminator. Check all cables for defects. Reset fixture(s). Fixture Moving On Verify proper mode of operation. Is the fixture in “Auto” mode? Its Own Page 13 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Keeping Your Solar Cell™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equip- ment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed.
Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and power- CON® are registered trademarks of Neutrik AG. Page 15 Solar Cell™ User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC...
Page 16
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...
Need help?
Do you have a question about the SOLAR CELL and is the answer not in the manual?
Questions and answers