Specifications - AEG FW 5549 Instruction Manual

See below "Electrical connection/Application
instructions".
Electrical connection
• Ensure that the function switch is set to "" (Off).
• Connect the appliance to a correctly installed and
earthed socket 230 V, 50 Hz.
Switch Functions Forward/Return
The appliance is equipped with a forward and return
function. If the scroll should block, you can use the
return function, in order to release it.
Forward:
• Turn the switch (3) to " ". The appliance is in the
"Forward" mode.
Return:
• Turn the switch (3) to "" and wait until the motor
stops..
• Turn the switch (3) to "R". The appliance is in the
"Return" mode.
Switching off
Move the safety switch (3) to "" and pull the power
plug.
Application instructions
Making sausages
• You can use either natural or artificial intestines.
• If you have decided for natural intestines, soak them
beforehand for some time in water.
• Make a knot at the end of the intestine.
• Push the intestine over the sausage attachment.
• The sausage mass is pressed through the sausage
attachment and the sausage intestine is filled.
• Make sure that the sausage intestine is filled
"loosely", since otherwise the intestine could burst
because the sausage expands when cooking and/or
frying.
• After the first sausage has achieved the require
length, press the sausage together at the end of the
sausage attachment with your fingers.
• Until you have acquired routine, you can switch the
appliance off after each sausage section.
• Twist the sausage once or twice around its own axis.
Cookie attachment
• Screw the cookie attachment on and adjust the
required cookie shape.
• Put the dough on the filling tray and filler.
• Hold the dough strands at the outlet with your hand
and cut off the required length.
05-FW 5549 AEG.indd 31
Cleaning and maintenance
• Always pull the power supply plug before cleaning
and wait until the appliance has cooled down.
• Do not use a wire brush or other abrasive items.
• Never use sharp or scouring cleaning materials.
WARNING!
Never immerse the motor assembly in water for
cleaning. It could result in an electric shock or fire.
Motor assembly
• Only wipe the motor assembly with a damp cloth and
dry with a dry cloth after.
Filling tray, scroll, scroll housing and all accessories
ATTENTION!
• Do not clean these parts in the dishwasher.
• The surfaces could become lacklustre.
• These parts can be cleaned by hand in the wash
basin.
• Rinse with clear water and dry the parts.
Noise development
The sound pressure level in the ear of an operator (LpA)
was measured according to DIN EN ISO 3744.
Sound pressure level detected: 85 dB(A) (no limit)

Specifications

Model: ...................................................................................FW 5549
Power supply: ...................................................... 220-240V, 50Hz
Power consumption:.................................................. 400W nom.
Block power:: ..............................................................1000W max.
Protection class: ...............................................................................II
Net weight: ...........................................................................3,95 kg
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
English
31
11.09.2009 9:14:18 Uhr