Memory Function; Front Seats; Tilting Head Restraints; Power Liftgate - Ford 2013 EXPLORER Quick Reference Manual

FUnC tion
rear vieW CaMera bLind SPot inForMation
*
SySteM (bLiS
This system provides a visual display of
the area behind the vehicle. The display
traFFiC aLert (Cta)
automatically appears in the touch
BLIS uses sensors to help you determine
screen when the vehicle is in R (Reverse)
if a vehicle may be in your blind spot
and uses green, yellow and red guides to
zone. The CTA feature alerts you if a car
alert you of your proximity to objects. For
is coming toward you when you are
non-touch screen vehicles, the image will
backing out of a parking space. BLIS
appear in the 4.2-inch display.
and CTA will display a yellow indicator
light in your exterior mirrors and the
CTA will also sound tones and display
messages to warn you which direction
vehicles are approaching. Refer to the
Driving Aids chapter in your Owner's
Manual for more information.
SeLeCtShiFt aUtoMatiC
tranSMiSSion
reverSe SenSing SySteM
*
Gives you the ability to manually change
This system sounds a warning tone if
gears, if you'd like. To use, move the
there is an obstacle near the vehicle's
gearshift lever from D (Drive) to M
rear bumper when the vehicle is in R
(Manual). Then use the toggle on your
(Reverse) and is traveling less than 3 mph
gear shift lever to make shifts manually.
(5 km/h). The warning tone will increase
Press the (+) button to upshift, press
in frequency as the object gets closer.
the (–) button to downshift.
note: Visibility aids do not replace the MyKey
®
need to watch where the vehicle is moving.
MyKey allows you to program certain
Refer to your Owner's Manual for safety
driving restrictions in order to promote
information, more details and limitations.
good driving habits. You can program
things like speed restrictions, limited
volume levels and safety belt reminders.
14
For complete information, refer to the
) With CroSS MyKey chapter in your Owner's Manual.
®
*
SeCUriCode KeyLeSS
™
entry SySteM
*
Allows you to lock or unlock the doors
using the touchpad. You will need your
five digit factory code located on your
owner's wallet card in the glove box.
Refer to the Locks chapter in your
Owner's Manual for more information
on how to use SecuriCode.
™
*

PoWer LiFtgate

*
Your liftgate has an automatic open
and closing feature. To open remotely,
press twice on your keyhead within
three seconds. Press twice again to
close or reverse the movement. You can
also operate the liftgate by pressing
the control located on the
instrument panel.
*
(if equipped)
CoMFort
heated and CooLed PoWerFoLd

Front SeatS

*
note: The PowerFold seats work only
To access heated seats and cooled seats
on touch screen equipped vehicles, press when the vehicle is in P (Park) and the
the Climate corner on your touch screen. liftgate is open.
Press the heated or cooled seat
icon repeatedly to cycle through the The third-row seat features a power one-
various heat or cool modes and off. For touch operation that allows you to adjust
non-touch screen vehicles, use the hard the seats with the touch of a button. The
button controls (indicated by the same buttons are located behind the third-row
symbols). Press the controls repeatedly seats on the left-side quarter trim panel.
To use, press the rh/both/Lh button
to cycle through the various heat or cool
modes and off. Indicator lights on the to select the right-side seat, the left-side
control will show what settings you seat or both seats you want to move.
have selected. Then, select the desired seat position:
• Press the StoW button to stow the

tiLting head reStraintS

seat into the tub floor.
*
• Press the FoLd button (the top
Your vehicle's front row head restraints
portion of the button) to fold down
can be adjusted. Pull up to raise the head
the seat back.
restraint. To lower, press the head restraint
• Press the norMaL button to return
down while pressing and holding the
the seat to the normal seating position.
guide sleeve adjust/release button. Tilt the
head restraint for additional comfort by
gently pulling the top of the head restraint
forward. Once it is in the forward-most
position, tilting it forward once more will
release it to the upright position.
note: Do not attempt to force the
headrest backward after it is tilted. Instead,
continue tilting it forward until the headrest
releases to the upright position.
third-roW Seat

MeMory FUnCtion

® *
Allows one-touch recall of memory
positions for the driver seat, power
mirrors, steering column and power-
adjustable foot pedals. Use the memory
controls located on the driver's door
to program and then recall memory
positions. To program position 1, press
and hold the 1 button until you hear a
chime. Use this same procedure to set
positions 2 and 3 using the respective
buttons. You can now use these controls
to recall the set memory positions.
dUaL-PaneL MoonrooF and
PoWer SUnSCreen
Your moonroof is equipped with a
one-touch, express opening and closing
feature. To open, press and release the
SLide control, the sunscreen will open
automatically and the moonroof will
open to the first position. To fully open the
moonroof, press and release the SLide
control again. To close, pull and release
the SLide control. Press and release the
tiLt control to vent the moonroof. Pull
and release the tiLt control to close the
moonroof. To open the sunscreen press
and release . Pull and release
to close the sunscreen.
*
(if equipped)
*
*
15