JML Pheonix Gold User Manual page 5

Safety Warnings & Advice
continued
Always unplug Phoenix Gold immediately after use.
Do not use any part that has become damaged.
Never operate Phoenix Gold if it has a damaged cord
or plug, if it is not working properly, or if it has been
dropped, damaged or dropped into water.
Do not attempt to repair Phoenix Gold, the power
cord, or plug if they become damaged. Repairs must
only be made by a qualified service engineer.
Always unplug Phoenix Gold before filling the water
tank. Do not overfill with water.
Fill the Water Tank with distilled or boiled water to
prevent calc/limescale build-up.
Never touch the Ceramic Plate when the iron is
switched on or immediately after switching off.
The Power Cable should never touch the Ceramic
Plate during or soon after use.
Ensure the Water Tank Cap is closed firmly before use.
Do not allow the Water Tank to run dry during use.
Only use on a stable, flat, ironing surface.
Allow the Ceramic Plate to cool completely before
cleaning.
Check that the voltage on the rating plate of Phoenix
Gold corresponds with your house electricity supply,
which must be A.C. (alternating current).
3
PG_IM_A.indd 5 23/06/2014 15:22