Black Box AVX-HDMI-WI-HD User Manual page 38

Chapter 5: Web Management
NOTE: Auto-Configuration Network Setup on WHPS.
The default setting of the WHPS box is DHCP client. When the WHPS box is connected to a LAN that already has a DHCP server
present, the WHPS box takes an IP address assigned to it by the server. When the WHPS box is connected to a LAN that does not
have a DHCP server, the WHPS box becomes the DHCP server in the network.
IP Setup
• You can select "Obtain IP address automatically" or "Use the following IP address."
• IP Address: The default value is 192.168.100.10.
• Subnet Mask: The default value is 255.255.255.0.
• Default Gateway: The default value is 192.168.100.10.
• DNS Server: The default value is 192.168.100.10.
DHCP Server Setup
• You can select "Auto (Enable/Disable DHCP Server" or "Disable.")
• Start IP: The start IP address of DHCP Server.
• End IP: The end IP address of DHCP Server.
• Subnet Mask: The default value is 255.255.255.0.
• Default Gateway: The default value is 192.168.100.10.
• DNS Server: The default value is 192.168.100.10.
Wireless Setup
• Wireless LAN: The default value is "Enable."
• Region: Default value is "Worldwide."
• SSID: SSID string, max. Length is 32 bytes.
• SSID Broadcast: The default value is "Enable."
• Channel: To set fixed channel or Auto. The "Auto" means that after WHPS powers on, it will scan all wireless channels and
select one clear channel automatically.
• Encryption: You can select "Disable" or one of WEP/WPA/WPA2 64-bit or 128-bit in ASCII or HEX string.
• Key: If Encryption is enabled, you have to set the key value according to the encryption mode you selected.
AP Client
• Connect to Existing AP: Input the SSID of home Wi-Fi AP you want to connect.
• Encryption: You can select "Disable" or WEP/WPA/WPA2 64-bit or 128-bit in an ASCII or HEX string.
• Key: If Encryption is enabled, you have to set key value according to the encryption mode you selected.
• Press the "Apply" button, and follow the reboot instructions to make it work.
Apply: Press the "Apply" button to select this mode.
Cancel: Press the "Cancel" button to abort action.
Gatekeeper
Gatekeeper is designed to ensure the enterprise network security within the WHPS box.
• "All Block" can block Guest Users (through wireless) from accessing all office networks (LANs).
724-746-5500 | blackbox.com
Page 38
AVX-HDMI-WI-HD