- Respect the environment; use suitable receptacles for collection of Operator exposure to sound emission levels (continuous sound pressure cooling water contaminated with cutting dust. levels equal to A weighting); the COMBI 350 saw noise emission level during cutting is 93 dB(A) with continuous rim blade. 7. SAFETY PRECAUTIONS IMER saws are designed for work on construction sites and under 4.
IMER U.S.A. Inc. COMBI 350 5 - Set the switch to 1 and when the motor is started return to The machine must never be used in environments position 0 after ensuring that cooling water reaches the blade. subject to risks of explosion and/or underground sites.
IMER U.S.A. Inc. COMBI 350 16.5 CARRIAGE CLEARANCE ADJUSTMENT (Ref. fig.9) the worktable. Tighten the knob fully to lock into position. LATERAL ADJUSTMENT: turn adjustment screw 1 gradually To bring the blade back to the vertical position (pos.0) carry out the above clockwise using a hex wrench no.3, so that the internal roller...
Page 6
IMER U.S.A. Inc. COMBI 350 18. SPARE PARTS :All orders for spare parts must indicate the following: 1 - Type of machine.2 - Part number and position number of each part.3 - Serial number and year of manufacture reported on the machine's identification plate.
ONE YEAR WARRANTY We warrant to the original purchaser that the IMER equipment described herein (the "equipment") shall be free from defects in material and workmanship under normal use and service for which it was intended for a period of one (1) year from the date of purchase by the original purchaser.