Creative TACTIC 3D WRATH User Manual page 7

Using your headset while charging
You can continue to use your headset even while it charges. The Power
LED will continue blinking blue in slow motion as it is still charging and
lights up blue when fully charged.
Using the Wireless Features
The wireless capability gives you the convenience and freedom to move
around up to a distance of 30 feet (10 meters) away from the transmitter.
Your headset and wireless transmitter are paired together and are ready
to use. If you wish to pair them manually, follow the steps below.
Step 1: Activate pairing mode on the headset
Press and hold the headset's Microphone Mute button for three seconds.
The Connect LED will then begin flashing red at a faster blink.
Step 2: Activate pairing mode on the transmitter
Press and hold the transmitter's Connect button for three seconds. The
Connect LED on the transmitter will then begin flashing blue at a faster
blink.