HDMI combining with the video, or Coaxial S/PDIF separately. Cypress CP-255I has a comprehensive OSD menu that allows user to select a variety of output resolutions and adjust for best picture quality.
4. Operation Controls and Functions 4.1. Front Panel 1. POWER Button and LED Indicator: Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is turned on. 2. IR remote control sensor. 3.
Page 6
1. HDMI OUT and CO-AX OUT: Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output. 2.
4.4. Remote Control 1. POWER: Press the button once to power on the CP-255I. Press again to enter standby mode. 2. INPUT: Press the button repeatedly to toggle through various input sources. 3. HD Input: Press the button to directly select component input.
5. CP-255I RS-232 Remote Control Protocol * The connection between CP-255I and remote controller with RS-232 modem cable. Pins definition of modem cable CP-255I Remote Controller Definition Definition * RS-232 transmission format: Baud Rate: 19200 bps Data Bit: 8 bits...
Page 10
(A) Set Commend: Command Code Response Description S POWER 0 > POWER OFF POWER OFF S POWER 1 > POWER ON POWER ON S SOURCE 0 > SOURCE CV CV INPUT S SOURCE 1 > SOURCE SV SV INPUT S SOURCE 2 >...
Page 11
(B) Status Commend : Command Code Response Description R POWER > POWER ON SHOW POWER STATUS R SOURCE > SOURCE CV~HDMI SHOW SOURCE STATUS R OUTPUT > OUTPUT NATIVE~WUXGA SHOW OUTPUT STATUS R SIZE > SIZE FULL~PANSCAN SHOW SIZE STATUS R PICTUREMODE >...
6. Specifications 6.1. General Specification * Frequency bandwidth: 1.65Gbps (single link) * Input Ports: Composite x 1 / L/R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / L/R x 1 PC D-Sub (15-pin) x 1 / 3.5mm Phone Jack x 1 HDMI x 1 / 3.5mm Phone Jack x 1 (for DVI) Coaxial (S/PDIF) x 1 * Output Ports:...