Canon Powershot A590 IS User Manual page 65

2
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Settings] in the Rec. menu, the
self-timer lamp will light 2 seconds before the flash fires
To Cancel the Self-Timer:
Follow Step 1 to select
Changing the Delay Time and Number of Shots (
1
Select
1. Press the
2. Use the
(Drive Mode) and the
to select
3. Press the
2
Make settings.
1. Use the
[Delay] or [Shots] and the
button to change the settings.
2. Press the
3. Press the
If the [Shots] option is set to 2 or more shots, the following
occurs.
- The exposure and white balance are locked at the settings
selected for the first shot.
- If the flash is used, the interval between shots lengthens.
- The interval between shots may lengthen when the built-in
memory of the camera fills.
- Shooting will automatically cease if the memory card
becomes full.
.
.
button.
or button to select
or
.
button.
or button to select
button.
button.
button
or
63
(p. 86).
)