Standby; Volume Control (Optional For Ite Only) - Opticon epoq cic Instructions For Use Manual

standby

If your hearing instrument has a push-button, push the button for a minimum of 3 seconds
to set the instrument in standby mode.
To reactivate the instrument, push the button brieftly again.
Use the standby function if you need to silence the instrument.
IMportant notIce
Do not use the stand-by function as a switch off as the
hearing aid still draws current from the battery in this mode.
PUSH
3 sec
16

Volume control (optional for Ite only)

Your ITE instrument may have a Volume Control wheel. The Volume Control wheel can be
turned with the tip of a finger and can be rotated infinitely both ways.
Volume
Control Wheel
17