Table of Contents
Advertisement
Available languages
Available languages
GB Power Switch
Identifying the parts
1
L
E
D
i
n
d
i
c
L
E
D
i
n
d
i
c
T
e
s
t
B
u
t
t
T
e
s
t
B
u
t
t
2
Getting Started
Plug the Power Switch into the power outlet.
Keep pressing the Learning key on the Power Switch at least 10 seconds until the LED flashes slowly
to indicate the Power Switch is in Learning Mode.
Put the Control Panel into Device +/-, select Power Switch, use & keys to select a desired
channel and press OK key.
When the Power Switch receives the code from the Control Panel, the LED of the Power Switch will
flash quickly 3 times to confirm the code had received.
<
N
O
T
E
>
<
N
O
T
E
>
After the LED flashes quickly 3 times, the Power Switch will leave the Learning Mode automatically
and the Learning process is complete.
In Learning Mode, if the Power Switch has not received the signal from Control Panel for 3 mins, it
will leave the Learning Mode automatically.
Operation
Plug the Power Switch into the power outlet.
Plug electric appliances (ex. lamp) into the socket of Power
Switch. The electric appliance must be in ON status.
After the Control Panel is learnt-in the Power Switch, to
turn on or off the electric appliances can use Control Panel, SMS remote control (please refer the
manual of the Control Panel) or press the test button.
(PSSA-8 / PSSA-8UK)
a
t
o
r
a
t
o
r
o
n
o
n
1
2
Advertisement
Table of Contents
