Summary of Contents for Cli-mate CLI-AP-BF
- Page 1 Bladeless Fan with Air Filtration CLI-AP-BF | Installation & Operating Instructions CLI-AP-BF | Installation & Operating Instructions...
- Page 2 70 Hardys Road, Torrensville SA 5031 Telephone: 08 8354 0711 Facsimile: 08 8354 0722 Electrical Requirements: Email: aquaport@aquaport.com.au New Zealand Customers Australia / New Zealand 100-240V 50/60Hz Web: www.cli-mate.com.au Telephone: 0800 210 190 Due to manufacturing alterations product may Social: /climatebrand @climatebrand Email: info@aquaport.co.nz...
-
Page 3: Safety Precautions
SAFETY PRECAUTIONS • Unplug from outlet when not in use and before cleaning. Never plug in or unplug unit with wet hands Read all instructions carefully. • Do not use unit outdoors or expose to greasy or damp • All components need to be installed in accordance with the user environments manual instructions for correct performance of unit •... -
Page 4: Product Specifications
PRODUCT SPECIFICATIONS System Specifi cations CLI-AP-BF Bladeless Fan with Air Filtration Model Code CLI-AP-BF Power Output DC 24V 1.5A 36W Power Input Australia / New Zealand 100-240V 50/60Hz Air Flow 516m Replacement Filter Code CLI-APBF-RF 2 kgs 3 kgs Product Dimensions... - Page 5 UNIT COMPONENT IDENTIFICATION 1. Power button ON/OFF 2. Fan speed knob (7 Speeds - Turn knob clockwise to increase speed. Turn anti-clockwise to decrease speed. ) 3. Power indicator light 4. Oscillation button 5. Air inlet and fi lters (left side not shown) 6.
- Page 6 REMOTE CONTROL COMPONENT IDENTIFICATION 1. Oscillation 7. LED On/Off 110° oscillation range. Press a. Turn Off LED button again to lock current b. Turn On position. (LED will start at the last set program) 2. Power On/Off 8. LED light mode settings Switch unit On or Off.
-
Page 7: Tilt Function
TILT FUNCTION CLEANING AND MAINTENANCE To adjust the air fl ow angle, hold the base and tilt the fan WARNING: Before carrying out any maintenance or cleaning of the backwards or forwards (up to 15°) unit, make sure that the power to the unit is turned off and power cord is unplugged from the power socket. - Page 8 CLEANING AND REPLACEMENT OF FILTERS Removing Filters Note: Unit contains 2 fi lters. (1 located on the left side of the unit Cleaning Filters and 1 located on the right side of the unit). It is recommended that the fi lters are cleaned monthly. Figure 1: Press and hold down button and pull outwards 1.
-
Page 9: Troubleshooting
TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem Possible Causes What To Do No power 1. Unit is not plugged into wall socket. 1. Check connection to wall socket. 1. Air inlet or air outlet is being 1. - Page 10 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or...
- Page 12 CUSTOMER HOTLINE: 1300 764 325 Aquaport Corporation Pty Ltd 70 Hardys Road, Torrensville SA 5031 Telephone: 08 8354 0711 Facsimile: 08 8354 0722 Email: aquaport@aquaport.com.au New Zealand Customers Telephone: 0800 210 190 Email: info@aquaport.co.nz Web: www.cli-mate.com.au Social: /climatebrand @climatebrand...
Need help?
Do you have a question about the CLI-AP-BF and is the answer not in the manual?
Questions and answers